new research reveals PP mesh degrades invitro in a significant
What is the most suitable experimental setting to understand the consequences of a particular gene: (1) targeted degradation of the specific transcription factor (TF) of the gene, followed by...
04 August 2024 6,265 1 View
These will be used for the study of microplastics in the lung
29 July 2024 9,609 2 View
Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...
25 July 2024 8,108 0 View
I’m having difficulty achieving high RNA integrity in my samples. Although the 260/280 and 260/230 ratios are satisfactory after RNA extraction, the RNA samples show signs of degradation when...
22 July 2024 155 4 View
I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...
21 July 2024 1,559 1 View
I want to extract glycosides from my mangrove leaf samples, but my laboratory lacks an incubator capable of reaching temperatures above 60°C. The paper I am following specifies a minimum...
13 July 2024 3,686 0 View
We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...
12 July 2024 2,768 1 View
Hello, I am looking for (estimated) degradation rates of cellulose in a classic anaerobic digestion setup (meso or thermophilic, WWTP sludge, 30+ days of operation) to have an idea of the % of...
01 July 2024 5,867 5 View
In an antibiotic degradation experiment using metals carbon composites to activate PMS, the results doesn't fit pseudo first or second order kinetics however the degradation efficiency is very...
26 June 2024 6,941 3 View
A physical mix was in vitro evaluated on a torque rheometer. The composition was predominantly recycled polypropylene (PP), yet the melt flow index (MFI) was found to be excessively high....
25 June 2024 10,154 0 View