Is there any chance of formation of other isomers.please clarify.
What kind of sample is being measured?
I am thinking this may be to prevent either any settling or perhaps photochemical reactions should the sample be photosensitive.
Dear Vasan,
Thanks for the response.Actually it is the KSM of Abacavir.
I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...
13 August 2024 9,795 0 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I'm researching light sources and their UV emissions. I'm curious if a 50W, 7500K conventional LED lamp emits any UV light. I found that a 200W tungsten lamp can emit up to 1.5 mW/cm² at 350 nm....
31 July 2024 3,843 7 View
In cases where the rotational of the magnetic field H is zero, we can define this field as the gradient of a scalar function defined as the magnetic scalar potential (similar to the electric...
21 July 2024 9,633 4 View
Let's say I rotate a hexagonal crystal using Euler angles (φ1, φ2, φ3); and rotate another similar crystal using Euler angles (ψ1, ψ2, ψ3). What would be the angular difference between the final...
17 July 2024 5,582 1 View
A universe model compatible with VSLT The research of Halton Arp and Eric Lerner supports a stationary universe, and the intrinsic nature of redshift, i.e. not linked to its presumed expansion...
14 July 2024 4,092 5 View
Is any specific sample preparation required to perform VSM measurement of NdFeB alloy powder to get a square-shaped M-H loop? Or is it mandatory to make magnetically aligned and sintered pellets...
09 July 2024 1,969 0 View
I'm having a bubbling error while splicing 100/350 um optical fiber (core/cladding) on the Fujikura FSM100P+. I have tried some ways such as changing Prefuse power and Prefuse time but to no...
03 July 2024 7,463 6 View
Hi Everyone, I plan to deposit a catalyst (TS-1@Co-PDA, in the core: TS-1 zeolite with a shell of Polydopamine designed with Cobalt) on a rotating ring-disk electrode (RRDE) to evaluate the...
29 June 2024 8,203 3 View
I am trying the simulate the drum brake squeal in ansys. For giving the rotational velocity to drum what should i use the Rotational velocity or CMROTATE command.
24 June 2024 5,125 0 View