Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

Can a Golgi-stained dendritic spines picture processed by Image J be directly used for publication?

24 February 2021 3,348 2 View

What is the difference between PBE and PBEsol functional?

Hello, I am a 3rd year chemistry student and I'm writing my project report on computational chemistry. does anyone know how PBEsol improves upon the PBE functional? Thanks in advance

19 February 2021 7,068 4 View

Can someone help me with this error that I am getting while estimating a VAR model in R?

I am using annual time series data to estimate a VAR model in R. However, when I run the command to find the optimal lag length, I get the following error: Fehler in VARselect(data, lag.max = 10,...

18 February 2021 9,647 3 View

In your experience what is the difference between G.652D and G.655D optical fiber. In field and in lab?

In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...

11 February 2021 4,006 8 View

RNA degraded after good nanodrop readings?

23 February 2021 8,850 2 View

Antibody amino acid sequence database to simulation?

Hello, I need your help. I am looking for a database of antibody amino acid sequences for later simulation in a program in order to analyze their structure. The antibodies I need to test...

18 February 2021 371 4 View

ZnS oxidizes to ZnO!!why??

when I put my ZnS solution in the chemical bath, the ZnS oxidizes so there are ZnO peaks appearing because of the reaction with the oxygen in the air, despite the fact that I close the beaker...

14 February 2021 5,778 9 View

Xrd result of ZnO thin film shown better crystallinity at low temperature and the crystallinity decreases as the temperature increased. why?

I have synthesized ZnO thin films at four different substrate temperature say, 300, 350, 400 and 450C. and the samples were annealed at 450C for half an hour. the xrd result shown better...

04 February 2021 7,641 4 View

Can I publish my published dataset (data-report article) later as an original article?

I want to quickly publish a data-report .Because there is a lot of data and it will take time to create the original article. But my main goal is to use that data-set in the original article. Is...

02 February 2021 9,779 7 View

Does anybody has the biodot zx1010 manual?

25 January 2021 6,257 1 View

What is the basis set to optimize ZnO using GaussView for DFT calculation study?

Greetings, I have a bit of problem in setup the basis set of my DFT study for ZnO.. As you can see in the image attached below, I use B3LYP 6-31G (d,p) for geometrical opt. of ZnO.. But sadly, I...

13 January 2021 7,508 4 View

The > 91 Years long collective IQ Blunder ?

Never before was there a bigger blemish. Namely: Not to collectively underastand Zwicky's discovery of Cryodynamics, as his sister to deterministic Thermodynamics came to be called later. Dec....

30 December 2020 8,300 5 View

What is the advantage of nanostructured ZnO thin film over continuous ZnO thin film for optoelectronic application?

What is the advantage of nanostructured ZnO thin film over continuous ZnO thin film for optoelectronic application?

30 December 2020 9,422 2 View

Is explanatory sequential design the right design for my research?

I am interested in finding the effects of technology on the learning achievement of students. The data collection will include pre and post test scores of the experiment group and later...

26 December 2020 3,757 4 View