27 October 2022 1 9K Report

I obtained a result to investigate the acid sites of HZSM-5 via ammonia-TPD; but it did not turn out what I expected from other journals.

What may be the root cause of this problem?

More Muhammad Amir Aqil Mohamad Dzol's questions See All
Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Similar questions and discussions
Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can I simply dilute 25% NH3 solution to 10% solution by pouring water in tank and circulating with pump?

Is there any heat of dilution which I need to take care by putting some circulation cooler? Will there be any significant ammonia emission in the process?

09 February 2021 5,943 2 View

PEG coated Fe3O4 nanoparticles in aqueous NH3?

Hello, I synthesized PEG coated Fe3O4 nanoparticles by coprecipitation methods and I would like to ask whether they can be dispersed in aqueous NH3 since they have a PEG coating and theoretically...

06 February 2021 5,217 4 View

Best Way to Preserve Nitrifying Bacteria in Liquid Culture?

I have a heterogeneous culture of nitrifying bacteria that was originally isolated from the field. It has been kept alive for several months in a bioreactor. I want to pull some of this...

18 December 2020 5,411 4 View

How to compute pressure drop on liquid ammonia line?

I have to analyze an existing ammonia line to estimate the pressure drop in it. The line is designed to transport liquid ammonia. I can compute the pressure drop with standard friction factor...

21 November 2020 5,494 3 View

I am looking for air pollutants data for SAARC countries. Any organization or website that you love to recommend?

I am doing econometric modeling for air pollution and some other variables. But don't have the latest data (2000-2020) of air pollutants such as carbon monoxide, PM2.5, PM10, NOx, SO2 and ammonia....

27 July 2020 6,624 4 View

Why is there an absence of peak/s in the NH3-TPD analysis of silica ?

The NH3-TPD of commercial silica (S.A= 223m2/g) has been run on a Micromeritics 2900 AutoChem II Chemisorption Analyser to determine total acidity. However, there was no peak observed post-run....

29 April 2020 2,174 3 View

In which salt's 0.5 Molar aqueous solution at 35 degrees Celsius would Ammonia gas at 1.4MPa have the least solubility? NH3 Molality at 14 or below?

Looking for the salt with the greatest ability to effect the release of Ammonia gas from aqueous ammonia at a pressure of about 1.4MPa (i.e. salt not precipitating out of solution) and at a...

23 February 2020 4,530 3 View

What are the best methods to estimate ammonia volatilization by different nitrogen fertilizers?

Currently, I m developing a new fertilizer from organic and inorganic substances. I need to quantify how much nitrogen loss by ammonia volatilization in actual field level. Can anyone recommend...

04 February 2020 3,404 3 View

What will happen if a reaction is carried out using liquid ammonia and Iodine? Please suggest something for this reaction medium without any harm?

it was heard that the reaction mixture of liquid ammonia and Iodine is explosive. So, Kindly suggest some routes for this reaction to undergo without any harm. Thanks

23 January 2020 1,680 2 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close