What defines the shape of a twinned region?
Why are some of the Nickel-based Superalloys used in the as-cast condition?
21 February 2024 3,483 0 View
What are the benefits of Partial Solution Heat Treatments of Nickel-based Superalloys?
21 February 2024 1,430 2 View
method of the assessment
22 January 2024 9,711 0 View
First report of Fusarium causing leaf blotch of orchid in "India"?
22 August 2023 7,007 0 View
1. What is the correct pentapeptide sequence of ELPs: GVGVP or VPGVG? 2. Does the sequence "GVGVP" also encode the ELP protein? 3. What differences can be seen if we change the ELP pentapeptide...
31 May 2023 966 0 View
EF
25 May 2023 5,462 3 View
I want to do liminology of my fish pond. My major concern is with different types of algae present in the pond. ....kindly share your experience regarding sampling of algae and cell count per...
04 April 2023 9,950 1 View
Directional solidification and single crystal technologies are well developed and impart better properties than the polycrystalline superalloys. then why is the polycrystalline technology is still...
19 December 2022 8,052 6 View
To determine the critical temperatures in Ni-base superalloys, what should be the scanning rate (K/min) in Differential Scanning Calorimetry? How to choose scanning rate for a sample? Which one is...
15 November 2022 9,961 0 View
I want to know how to perform bridge vehicle interaction model in ANSYS ? What are the steps to be followed. Please suggest. If required you can contact me at- [email protected]
16 June 2022 6,274 0 View
Hi everyone, I am working on a curved domain in which a ship is situated in the middle (geometry is given below). In my understanding the general fluid flow is parallel to the x axis from inlet to...
25 July 2024 9,058 4 View
Greetings. I’m currently running a nested pcr for giardia. My mastermix comprised of 3mM Mgcl2, 5unit of taq polymerase, 0.2uM of forward and reverse primers each respectively and 0.2mM of dNtp...
22 July 2024 9,761 5 View
I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...
13 July 2024 3,631 4 View
Hello ! I would like to do band structure calculations of perovsikites materials with quantum espresso. For this I installed the Intel Fortran compiler. This is what I get when I run the...
08 July 2024 1,207 0 View
Recently I was suggested to do Parallel Analysis and compare with EV>1 to determine no of factors for my scale. However, the scale I have developed uses Principal Axis Factoring and not PCA. If...
30 June 2024 1,813 2 View
Dear All, I am writing to solicit your expertise regarding the application of Higher-Order Shear Deformation Theory (HSDT) and First-Order Shear Deformation Theory (FSDT) for structural...
22 June 2024 7,751 5 View
Cross-slip, twinning and fracture are major deformation modes adopted by loaded materials. It appears sound that these apparently different deformation mechanisms can be analysed on the equal manner!
15 June 2024 8,477 3 View
I have prepared Copper thin films by magnetron sputtering and the samples have been annealed at 100, 200 and 300 degree celsius. The variation of the rms roughness and all other AFM height related...
11 June 2024 9,774 1 View
I conducted a tensile test to analyze the strength of a welded joint and to implement an FEM model. Due to the high hardness of the base material, slippage between the grip and the base material...
10 June 2024 5,736 6 View
Thesis: The force may result from the parallel motion of matter from the past into the future. Therefore, this force is exclusively attracting.
09 June 2024 8,921 10 View
