Hello all,
I have to incorporate semi active damper in my suspension test rig for testing a performance of various type control algorithm, which will be applied through matlab/Simulink. kindly suggest suitable damper for this configuration with model no.
Dear Ashish,
This is an area that is currently active, or the results are constantly improving in order to meet the criteria of safety and comfort.
Here are link and attached files in subject.
Dear Ashish,
I'm sorry I forgot to mention in my answer the links here.
-Comparative Studies of Semiactive Control Strategies ... - ASCE Library
ascelibrary.org/.../(ASCE)ST.1943-541X.0000639?...
-Performance Comparison of Semi - Active Suspension and Active ...
https://www.researchgate.net/.../275462111_Performance_Comparison_of_...
Best regards
Read about the Bouc-Wen model and Skyhook, Groundhook models. There are a lot of references in Internet (including Matlab/Simulink files). Best.RZY
Ashish,
The answer is: No specific damper can be recommended, or any damper can work. Since you are testing the performance, you can put and semi-active suspension and apply the controls on them and see the results. If you are looking for the damper that gives the best results, then this means that someone before you have tested your controls on it among other dampers and found out which ones is the best, so why do you want to reconfirm that this damper is the best. Therefore, you need to test your algorithm on different dampers and see which one performs best. From experience, look for something with servo-actuator, and the ones with minimal response time to narrow your test group.
Best
- Badges
- Science topic