http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7464807

https://pdfs.semanticscholar.org/bf51/2da7d0e8814bb637970657e71ba11ae915ee.pdf

http://www.eecs.wsu.edu/~ee521/Material/20120830/System%20Security%20Concepts.pdf

thanks Hamit Can

[1] H.R. Baghaee, M. Abedi, “Calculation of weighting factors of static security indices used in contingency ranking of power systems based on fuzzy logic and analytical hierarchy process”, International Journal of Electrical Power & Energy Systems, vol. 33, no. 4, pp. 855-860, May 2011, DOI: 10.1016/j.ijepes.2010.12.012.

Based on the current advances in computing technologies, the full AC power flow based contingency analysis with proper contingency raking scheme will be sufficient for the N-1 contingency analysis for the intended time frame (about 10 min).

If you study includes dynamic security analysis too then the dynamic equivalences may be used for reducing the simulation times. You may refer to:

Article Stability-based minimization of load shedding in weakly inte...

Article Stability-based minimization of load shedding in weakly inte...

Book Dynamic Security of Interconnected Electric Power Systems - ...

Book Dynamic Security of Interconnected Electric Power Systems - Volume 1

Thesis Electromechanical System Equivalent and Dynamic Load Aggrega...

Article Coherency-based electromechanical equivalents for use in pow...

and other relevant publications

Thank you Prof. Mohamed EL-Shimy ,

could you send me this book:

Dynamic Security of Interconnected Electric Power Systems - Volume 2: Dynamics and stability of conventional and renewable energy systems

You are welcome Dr. Kouba. Please follow the book link (in my previous comment) to download it via the RG. If you have download troubles, please inform me.

Thanks again, but I find some troubles when I want to download the book, could you please send it to me via my box email

!

Unfortunately, there is a current problem in downloading the file from the researchgate. I contacted them for solving the problem. If it is not solved soon, I will send you an external link.

ok thank you.

I added an external download link as a comment at the book page (Book Dynamic Security of Interconnected Electric Power Systems - ...

You can download the full text via that link

Thank you Prof. Mohamed EL-Shimy .

You are welcome.

For testing N-1 security of a power system, we test generally the static security limits for some perturbations identified as critics.

when dealing with transient stability, does a fault on any line considered as a N-1 contingency?

Bouziane Boussahoua Can you please tell the difference between adequacy and static security?