Whether Anton Paar in-situ HTK 1200 N is compatible to use 10%H2+90%Ar gas mixture at 1000 deg C?

More Ravikumar Iyyamperumal's questions See All

What is the thermal expanion coefficient for Cr2O3?

Does it show positive or negative thermal expansion coefficient

02 March 2017 882 2 View

Why to use motorized anti-air scatter screen in powder XRD?

If the distance between the sample and anti-air scatter screen is kept constant through out my experiment whether there will be any beam cut at higher 2_theta angles. I am using Bragg-Brentano...

06 July 2016 6,206 2 View

What is the electrochemical reduction potential for Pt (NH3) 4Cl2 to Pt (0)?

standrad electrochemical reduction for Pt(NH3)4Cl2 to Pt(0)

03 April 2015 9,781 3 View

How can one prepare CuO nano particles at room temperature?

Is there any literature available for synthesis of CuO nano particles at room temperature and environmentally benign conditions?

31 December 2014 8,829 2 View

Can texture analysis be performed without an Eulerian Cradle in XRD?

Sample: Polymer films Instrument Configuration: Bruker D8 Discover with Lynxeye detector

11 December 2014 3,686 6 View

Is it possible to determine the acidity of gamma-alumina from XRD?

I would like to whether XRD can be used to calculate the acidity of gamm-alumina. if so I request you to share a relevant literature. I know other methods like chemisorpotion and FT-IR can be used...

01 January 1970 7,715 4 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

What precautions should be taken while handling S. aureus enterotoxin Type B in the lab?

I would like to understand potential safety concerns while handling SEB in the lab. Especially while working in animal house facility. Would like to know precautions for handling. Sigma MSDS...

07 August 2024 6,034 3 View

Fernando Vallejos-Burgos

Anton Paar has a great technical service that will be able to help you.

I recommend to inquire them instead of an internet forum which gives no guarantees.

Ravikumar Iyyamperumal

Thank you Fernando, I have inquired Anton Paar about this issue. They have suggested me not to use any reactive gases with these system because their furnace housing is just made of alumina. However, inert gases can be used without any problem

Well, you've got the answer!