Whether Anton Paar in-situ HTK 1200 N is compatible to use 10%H2+90%Ar gas mixture at 1000 deg C?

I would like to perform in-situ XRD studies using Anton Paar's HTK 1200N heat temperature over chamber in 10%H2+90%Ar gas mixture until 1000 deg C. Whether it is safe to work under these conditions?

11 December 2016 4,823 3 View

Why to use motorized anti-air scatter screen in powder XRD?

If the distance between the sample and anti-air scatter screen is kept constant through out my experiment whether there will be any beam cut at higher 2_theta angles. I am using Bragg-Brentano...

06 July 2016 6,077 2 View

What is the electrochemical reduction potential for Pt (NH3) 4Cl2 to Pt (0)?

standrad electrochemical reduction for Pt(NH3)4Cl2 to Pt(0)

03 April 2015 9,698 3 View

How can one prepare CuO nano particles at room temperature?

Is there any literature available for synthesis of CuO nano particles at room temperature and environmentally benign conditions?

31 December 2014 8,747 2 View

Can texture analysis be performed without an Eulerian Cradle in XRD?

11 December 2014 3,560 6 View

Is it possible to determine the acidity of gamma-alumina from XRD?

I would like to whether XRD can be used to calculate the acidity of gamm-alumina. if so I request you to share a relevant literature. I know other methods like chemisorpotion and FT-IR can be used...

01 January 1970 7,638 4 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Can we block unwanted images during the x-ray prediction?

i am try to classify the x-ray images. During classification , can i block unwanted images (except x-ray image).

03 March 2021 7,100 1 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

In an eye with Tyndall, does each dot correspond to an individual cell?

When you observe the presence of Tyndall in an inflamed eye: Does each of the small floating dots correspond to an individual cell or to an aggregate of cells? Does a conventional slit lamp have...

27 February 2021 6,326 2 View

How to calculate the crystallinity of cellulose film?

27 February 2021 2,753 4 View

What could be the reason for not having further low chi square value (better agreement) in my refinement result?

I have tried every combination of parameter changes and after that i have a poor chi square value. I can't get it lower any further. I know there have been a lot of discussion about Rietveld...

26 February 2021 8,480 3 View

Why do a weight decrease for thermal degradation in nitrogen gas condition?

Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...

26 February 2021 1,100 5 View