I want to find the energy consumption per unit volume during a waste water treatment processes. It should be comparable and also according to the pollutants concentrations.
The information may be provided by public wastewater management institutions in location exhibit a high demand for water resources which representative of most water reuse actions.
If you are looking for a particular range of values for a given WW type with specific salinities etc. you can find reasonably accurate specific energy consumption (SEC) values from manufacturers' software. I used the DOW software for RO and UF to find required feed pressures for particular membranes, and from there you can work out SECs from first principles, or you can just use the SECs provided which are pretty close to calculated values.