the LEACH protocol is divided into rounds . Each round is divided into setup phase and steady state phase. The power equations deal with steady state phase is known, but what about the power equations that's related to the setup phase .....
If you read the first paper of LEACH, you will find that they neglected power consumption in setup. The power consumption depends on distance and bits/ packet. If you know how many bits you need to send in setup you can calculate it.
If you read the first paper of LEACH, you will find that they neglected power consumption in setup. The power consumption depends on distance and bits/ packet. If you know how many bits you need to send in setup you can calculate it.
Analysis of Setup Energy of LEACH Protocol for Wireless Sensor Networks
Dear, check the following link, will help you:
http://www.ijser.org/researchpaper%5CAnalysis-of-Setup-Energy-of-LEACH-Protocol-for-Wireless-Sensor-Networks.pdf
thanks for help
this paper analyze the setup phase with all related equations step by step
https://www.researchgate.net/publication/266183128_A_New_Energy-Efficient_Adaptive_Clustering_Protocol_Based_on_Genetic_Algorithm_for_Improving_the_Lifetime_and_the_Stable_Period_of_Wireless_Sensor_Networks
Article A New Energy-Efficient Adaptive Clustering Protocol Based on...
- Badges
- Science topic