What's the effect of MgO impregnation over activated carbono on sugar clarification?

More Eliezer Ladeia Gomes's questions See All

In the synthesis of zeolite Y, how does sodium content interfere in the obtention of the desired phase?

Zeolites A and P often appear in standard syntheses. How does sodium sodium affect the construction of the phase?

07 August 2019 6,821 3 View

I need to obtain an equation for calculation of pure urea in liquid phase. Has someone a refrence? Or a thermodynamic equation for this?

I'm developing a work that needs the density of pure liquid urea. It's liquid when the temperature is higher than 134 oC, but I didn't find references for this property.

10 November 2018 4,043 2 View

How to modulate the surface acidity of a zeolite in a stable manner for testing in gas phase alkylation reactions? Which dopants should be used?

I want to test zeolite catalysts in alkylation reactions for linear C6-C9 alkanes using with several exchanged metals. I want to use only one zeolitic support, but modulating its acidity.

10 November 2018 6,860 7 View

Are there specific models for adsorption / desorption of drugs in porous solids?

In studies of adsorption / desorption kinetics of drugs in zeolites, the kinetic models of 1st and 2nd order as in chemical kinetics give very similar results. Are there specific models for the...

04 May 2018 4,345 7 View

How to differenciate Bronsted acid sites in "nests" from isolated ones?

Is there a characterization technique to differentiate acidic sites of bronsted that accumulate in "nests" of those that are isolated? If so, how to differentiate and quantify them?

03 April 2018 8,076 2 View

Is it correct to use the infrared bands to calculate and monitor the evolution of crystallinity of zeolite gels?

We have prepared zeolites from gels with different aging times. The cristallinity is evaluated from the relationship between the intensity of 550 cm -1 band (ZSM-5) and the intensity of the silica...

02 March 2018 4,853 4 View

We've prepared MCM`s since 1999. There's a decrease of organization of very old calcined mesop. materials, despite of storage free of water. Why?

We have observed the decrease of organization of mesoporous materials that was stored for long periods is notorious. The calcined samples were stored free of water. Samples prepared several years...

02 March 2018 7,345 0 View

Do Ce-Zr solids in fuell cells present good proton conductivity? How to improve this property?

Ce-Zr can be synthesized by simple techniques. Good results in preparation and characterization indicate interesting possibilities.

01 January 1970 6,298 0 View

How do I increase the yield of my PCR product?

Hello, We would like to increase the yield of our PCR product. We are running a series of PCR reactions that is targeting ~1.1kb sequence. We begin each reaction with ~400pg of template DNA...

02 March 2021 4,029 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How can I assign a velocity along one direction to CO2 molecules in a molecular dynamics simulation using GROMACS?

Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...

26 February 2021 10,014 3 View

CGA 300 Regulator for CO2 cylinder?

Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...

25 February 2021 3,292 3 View

What are the methods used for CNT..?

Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....

24 February 2021 5,383 5 View

How to clean up TEM grid with plasma cleaner?

I need to clean the hydrocarbon contamination on the carbon substrate of TEM grid. However, I heard that substrate could be broken by the powerful plasma. My substrate is pure carbon, with ~3nm,...

23 February 2021 3,262 5 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

What are some underexplored theories and concepts in Activated Carbon as A Water Filter?

Hi, me and my team mates are currently planning to pursue the topic of Activated Carbon from Coconut as a Water Filter. And we would like to ask for your suggestions and knowledge on what specific...

22 February 2021 6,569 3 View

Krishnan Raja

I have no idea about sugar clarification but assume that it is an aqueous process. If so, when MgO is exposed to water it will form a Mg(OH)2 surface layer onto MgO and possibly release some hydrogen. In this process Mg cation vacancies are introduced in the material which might affect the catalytic properties.