Which could be reliable when the surface area values are low?
https://books.google.iq/books?isbn=1315887487
One materials have two phases are called? If any references?
05 June 2018 2,619 10 View
how to calculate yield % in liquid? formula = (Actual yield / theoretical yield) * 100 how to calculate actual yield and theoretical yield?
11 December 2016 5,468 1 View
In the perovskite componds like ABO3 and A2BO4.
04 May 2016 6,407 3 View
we are getting '2' type or inverse of 'S' type curve. what is the reason can any one explain me.
01 February 2016 313 3 View
Ex, Sr doped La2CuO4 in XRD peaks will be shifted right to left.
01 February 2016 3,493 2 View
Is it in the range of 2 to 3 eV?
02 March 2014 8,482 4 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II
05 August 2024 5,291 2 View
How to calculate the molar proportions of the oxides from the XRF analyses?
02 August 2024 2,565 2 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?
30 July 2024 6,261 4 View
I will be doing an XRD on a sample which is powdered in natured and is a hydrogenated compound. I would like to know how we can understand the individual components and components by using the...
28 July 2024 4,548 2 View
Dear researchers, Why specific capacitance is not proportional to the specific surface area? I have material A with a surface area higher than material B, but material B is showing little bit...
26 July 2024 9,156 2 View
I'm working with a hydrogel sample and I'd like to perform XRD analysis. Can anyone offer guidance on preparing the hydrogel for the XRD instrument? Specifically, I'm unsure about the best method...
20 July 2024 3,611 4 View
Since BET and TGA both are very costly instruments and many places the facilities are not available (for large number of samples) hence a threshold degassing temperature and time is preferable
16 July 2024 8,112 2 View
