I simulated z source inverter and connected RL series branch as load with R=10ohm and L= 5mH .Output voltage is 100 and current is 5.I am getting output active power value around 170. But what must be the actual calculated value?
The active power is also function of the pulsation w, it is equal to I*V*cos(phi), where phi = atan(Lw/R), I and V are respectively the RMS values of i(t) and v(t). In your case, if Vrms = 100 V, Irms = 5 A, and let's consider w = 2*pi*50 then Pa = 5*100*cos(0.1558) = 493 W ..