What type of plastics (plates, tubes and pipet tips) should be used while working on endotoxin quantification in biological samples?

11 November 2014 0 6K Report

I know for example that polypropylene materials cannot be used due to their affinity and binding with endotoxins.

Can Polystyren materials be used or is it better to exclusively use glass material?

Badges
Science topic

More Aymeric Rivollier's questions See All

How do I generate mouse TH17 cells in vitro?

I am currently having consistency issues when generating Th17 cells in vitro. In general the viability in our cultures is pretty bad (around 30%) and the percentage of Th17 cells is never higher...

02 March 2015 639 7 View

Does anyone have a protocol or advice on how to avoid hemolysis while taking blood samples from a mouse?

I perform a colorimetric assay on serum prepared from these blood samples and the red color due to hemolysis is highly interfering with my readout. I tried tail vein, cardiac puncture and still...

10 November 2014 1,235 8 View

Weak DAPI staining after immunohistochemistry - how to improve?

After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...

05 August 2024 9,637 2 View

Project/Experimental assistance ？?

Do experiments on behalf of Our Business: Laboratory animal rearing Animal modeling Experimental animal behavior detection, image ultrasonic detection, electrophysiology platform Organoid...

05 August 2024 5,829 1 View

How to isolate lymphocytes from mouse spleen?

I have tried several times to isolate lymphocytes from mouse spleen, but all attempts have been unsuccessful. I tried most available protocols. I used different dissociation media (HBSS with Ca...

04 August 2024 9,913 7 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,368 2 View

Does anyone know where to find polypropylene microspheres or microparticles around 1-5micrometer?

These will be used for the study of microplastics in the lung

29 July 2024 9,609 2 View

Do some Staphylococcus aureus strains have in vitro antimycobacterial activity ?

Some Staphylococcus aureus strains Inhibit the growth of Mycobacteria in Mueller Hinton Agar medium containing 10% OADC. Do some Staphylococcus aureus strains have in vitro antimycobacterial activity?

29 July 2024 10,023 2 View

Can you recommend provider Intermediate laboratory test for hydrocarbon, polyethylene & polypropylene?

Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...

25 July 2024 8,108 0 View

How are clinical and environmental yeast/fungal strains stored usually in mycology laboratories?

I understand a glycerol stock for long-term preservation would be ideal, but how are working cultures generally stored? Mainly concerning Candida spp. isolates. A few references mention that they...

22 July 2024 6,592 3 View

Is it possible to manufacture polypropylene sheets using a biaxial process?

I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...

21 July 2024 1,559 1 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View