What the proper confienment to prepare Ni nanoparticles by laser ablation?

01 February 2017 9,085 0 View

Who is more accuracy to determine the grain size XRD or AFM?

Whose more accurate to determine the grain size XRD or AFM

01 February 2017 5,149 0 View

What laser conditions for nickel ablation?

01 February 2017 3,310 0 View

How to determine thin film thickness by XRF?

01 February 2017 7,920 0 View

How to determine the refractive index of liquid by laser?

please send me any information about refractive index of liquids by using laser

01 February 2017 2,205 0 View

How to determine the thickness of thin film by optical microscope?

01 February 2017 7,716 1 View

How to determine the wear rate by optical method?

The experimental procedure for optical method to calculate the wear rate in metals and alloys

01 February 2017 4,817 3 View

What the effect of thim film thickness on I - V characteristiv?

I-V properties influenced by thin film thickness

31 December 2016 3,334 2 View

Hoe to find the grain size?

method to calculate the grain size

11 December 2016 5,072 2 View

What the definition of Miller indices of Eribium oxide?

11 December 2016 2,169 0 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to add missing citation?

Dear colleagues, I have found that many authors have a concern regarding their missing citation in RG because often citation in RG is lower than google scholars. I also missed some citation...

26 February 2021 928 6 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Centrality measures computation in Biblioshiny/ Vosviewer?

26 February 2021 7,279 2 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

What is the optimum time and temperature of blanching and pre-frying potato for frozen fries?

I am helping a local home industry for developing frozen fries from their local farm. I want to know what is the optimum blanching and pre-frying temperature and time for processing. Please also...

23 February 2021 1,616 5 View