What magnification (?X) of microscope one can use to capture the image of motar and Stone chip ?

More Kumar Pallav's questions See All

Regarding Modelling and Analysis in Ansys.

We are modelling entire Old Building in Ansys. After carefully given the contact between brick masonry and Stone Arches. While carrying out messing of entire building, at many places the contact...

07 August 2017 5,114 1 View

If you have rebound hammer data of Old Masonry with calibration on concrete cube. The value obtained from the test can be used in Numerical model?

Need to know about using rebound hammer and UPV test value in Old Masonry model.

06 July 2017 3,531 21 View

Site response analysis

Why in most of the site response analysis 30m deposits of soil column is recommend instead of using actual sediment depth?

03 April 2016 7,118 2 View

Anyone plz suggest relevant topic for research in image processing+Deep learning.?

I have selected brain tumor images ...but now found that already lots of research done n this topic.

03 March 2021 5,774 3 View

Does any one know how i can prepare liver tissue with transmission electron microscope with good fixation?

i have problem in preparation of liver tissue with bad cell organelles and how i can adjust osmolarity

03 March 2021 8,890 1 View

Can we block unwanted images during the x-ray prediction?

i am try to classify the x-ray images. During classification , can i block unwanted images (except x-ray image).

03 March 2021 7,100 1 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

Do I need to strip the PVDF membrane before staining it with colloidal gold?

Dear Colleagues, After running Western blot on PVDF membrane and detection using ECL, I would like to stain my PVDF with colloidal gold to be able to allign the ECL image with total proteins on...

02 March 2021 7,829 3 View

Do you know any MR image dataset?

I would like to research on MR images (0.5T and 3T). Can you please suggest some websites that I can download dataset including both 0.5T and 3T MR images? Thank you.

02 March 2021 7,735 3 View

How to find the mode of classified ocean colour images?

Hello, I have classified 10 S3 OLCI images from the same area (althouth not the same size and/or quadrant) and I would like to do a final image using the mode of the pixel of these 10 images. I...

01 March 2021 9,874 3 View

Can someone suggest a way to prepare slides to observe under confocal microscope for observing fluorescent tagged proteins??

I am growing the cells on coverslips and transfecting the fluorescent tagged protein directly on them. Then i want to observe these cells under confocal microscope. Currently i am just using...

01 March 2021 6,142 3 View

In an eye with Tyndall, does each dot correspond to an individual cell?

When you observe the presence of Tyndall in an inflamed eye: Does each of the small floating dots correspond to an individual cell or to an aggregate of cells? Does a conventional slit lamp have...

27 February 2021 6,326 2 View

How to threshold an image despite bright lighting, using ImageJ/Fiji?

Hi everyone, I am using Fiji to determine the percentage of the image covered by leaves, branches, or trunk, but i've encountered some difficulty when the sun hits parts of my image like the one...

27 February 2021 1,194 3 View

Laetitia Hudecek

Dear Kumar,

It is more a matter of resolution (depending on the microscopy technique, the numerical aperture of the objective but not its magnification, etc) than a magnification': what is the magnitude order of the particles?

Regards,

Laetitia

Kumar Pallav

Thank you Laetitia,

The order of particle will 75 micro and above. Can you help me to see the particles size in the motar material.

Regards

Kumar