With the aid of relevant illustrations
Research Gate article: Conference Paper Thermal comfort performance within heritage buildings subjec...
Dear Dr.Davidovits,
Buildings should take into account the local microclimate conditions at a certain place when being created, especially when it comes to thermal comfort, which is very location- and culture-dependent. It dealt with the following issue:
1 Window to Wall Ratio's Effect (WWR)
2. Thermal Mass in Buildings: Its Importance
3-Building Evaporative Cooling
4-Case study
5: Validation and Calibration of the Energy Model
6. Results and Discussion
7-Conclusions
Thanks for the answer. Do you have any bibliography for cultural heritage for that topic ?
https://www.eechb.eu/wp-content/uploads/2016/12/Proceedings_EECHB.pdf
Measurement and Diagnosis of Comfort in a Historic Building
https://mdpi-res.com › energies-15-08963
https://www.omicsonline.org/open-access/analysis-of-historic-buildings-of-microclimatic-thermal-comfort-2168-9717.1000126.php?aid=26645
Report 2—Conserving Federal Heritage Properties
https://www.oag-bvg.gc.ca
Thanks for the links.
here are some settings of thermal confort
1-air temperature
2-The wall temperature
3-The metabolism
4-clothing
5-air speed
6-The humidity
Could you recommend some articles on Urban Transportation System optimization and Innovation?
13 August 2024 2,595 3 View
I am working on microalgae cultivation using waste water. The initial concentration of nutrients were less but the microalgae has achieved biomass growth of 2 g/L. The final concentration of...
08 August 2024 4,812 2 View
If we map as a continuous motion an ionising electron (beginning its journey at n=1) in an H atom, a specific hyperbolic spiral appears (see animation). When we solve this spiral formula, we find...
07 August 2024 5,343 2 View
Articles on" Gender disparities i leatherwork education"
07 August 2024 2,500 0 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
I want to Estimate surface heat fluxes using MyLake, but I don't have all the initial values in model parameters section and other sections,is there a way?
04 August 2024 1,537 1 View
If from a geometric perspective the non-halogens, non-noble gases have more empty spots in their valence shell, and the filling/exiting of any of the empty spots in the shell constitutes a...
03 August 2024 4,787 2 View
Why is the molecule's orientation with an electric field affect polarizability? Electrons are diffuse enough to be independent with respect to orientation and effect of electric field on...
03 August 2024 7,843 1 View
why don't d-orbitals split themselves because of themselves without the presence of ligands? Electrons are indistinguishable. Why wouldn't it be more correct that protons from a ligand split the...
03 August 2024 3,589 3 View
I'm guessing it's because the ligand experiences too much electron repulsion or proton repulsion from the chromium to insert them close to the 3d-orbitals which are close to the metal nucleus. Is...
03 August 2024 1,370 1 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
What is the thermal expansion coefficient of human muscle?
27 July 2024 7,190 0 View
I want to extract glycosides from my mangrove leaf samples, but my laboratory lacks an incubator capable of reaching temperatures above 60°C. The paper I am following specifies a minimum...
13 July 2024 3,686 0 View
"When solar irradiation reaches a surface, some of it is absorbed while the rest is reflected. Part of the light absorbed by the surface transforms into heat and increases the module's...
13 July 2024 8,621 5 View
We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...
12 July 2024 2,768 1 View
WHS, Cultural Heritages, protected area, UNESCO,ICCROM, ICOMOS...
10 July 2024 3,556 12 View
One plant was closed it is uncertain what would be the cost of maintaining the infraestructure as industrial heritage. Any idea?
09 July 2024 7,969 0 View
For the PDMS material, it's linear thermal expansion coefficient is about 3.2*10-4/℃. The polyimide has a smaller linear thermal expansion coefficient like 2*10-5/℃, but it cannot be stretch. It...
04 July 2024 4,525 1 View
Is there any article can I find all thermophysical properties of MWCNTs nanoparticles especially, thermal expansion coefficient and electrical conductivity?
30 June 2024 4,075 2 View
I wonder the tendency of coefficient of thermal expansion (CTE) of polymer which has different chain structure. In my opinion, CTE will be higher when the polymer materials has high interaction...
30 June 2024 570 5 View