I want to know how much the yield stress of Ni is different from Ni3Al at lower temperatures in a nickel based superalloy. I am looking for some references in this regard.
You may use nano-indentation. One third nano-hardness is yield strength. If you have the material you can find out yourself.
Dear Ritukesh Sharma,
Please see whether these refs. are helpful:- yield stress data for pure Ni and Ni3Al (i.e., IC-221M) that you are looking for:-
1) For pure Ni:- (a) yield stress vs. temperature:- please see Fig. 6, Page 28 in a paper by Richard P Reed ('low temperature properties of Fe-Ni alloys') in Conf. (12th international conf. ICMC) Book:- "Advances in Cryogenic Engineering Materials", Vol. 44, Part A, edited by U. Balu Balachandran, Donald G. Gubser, K. Ted Hartwig, Richard Reed, William H. Warnes, Victoria A. Bardos, Springer 1998 (DOI:- 10.1007/978-1-4757-9056-6); and (b) please see the links if you have access:- http://www.nickel-alloys.net/commercially_pure_nickel.html and
http://www.matweb.com/search/datasheet.aspx?matguid=f4f8ef7d99d54afc85eb51b2778900ed&ckck=1
2) Ni3Al:- IC-221M (cast):- https://en.wikipedia.org/wiki/Nickel_aluminide
3) Ni3Al:- Chapter 5: 'Intermetallics' by J.K. Wessel and V. Sikka (Fig. 5.1 and Table 5.1) in "The Handbook of Advanced Materials: Enabling New Designs", Ed. -in -Chief: James K Wessel, Wiley-Interscience, 2004.
4) Ni3Al:- Fig. 14, page 104-105 (in special-purpose Ni alloys) in ASM Speciality Handbook: Nickel, Cobalt, and Their Alloys, edited by Joseph R. Davis, ASM International, 2000.
5a) Ni3Al:- Materials Science and Engineering A, 153 (1992) 364-369, paper by Y. Zhang and D. Lin ( or page 364 which is reprinted from the Journal Materials Science and Engineering A152 and 153:- Proceedings of the Second International ASM Conf. on High Temperature Aluminides and Intermetallics, edited by S.H. Whang, D.P. Pope, C.T. Liu)
5b) Ni3Al:- Table 2 in :Mater. Sci. Engng. A153 (1992) 520-524, paper by Brian Gieseke and Vinod Sikka (also the paper has been published in the above mentioned conference proceedings).
Best wishes
I agree with the suggestion/answer from Dr. Radosław Łyszkowski and I thank him for this information.
I like to add on; the RG link for the paper by Paweł Jóźwik et al.:- Review "Applications of Ni3Al Based Intermetallic Alloys—Current Stage and Potential Perceptivities", Materials 8(5):2537-2568 · May 2015
https://www.researchgate.net/publication/276266497_Applications_of_Ni3Al_Based_Intermetallic_Alloys-Current_Stage_and_Potential_Perceptivities
Article Applications of Ni3Al Based Intermetallic Alloys—Current Sta...
- Badges
- Science topic
- Similar topics
- Engineering
- Materials Engineering