I am working with photocatalysts. I use isopropanol as sacrificial agent and I would like to know what is the required voltage of the valence band that can oxidize isopropanol.
Thank you for your time
Посмотрите данные по полярографическому окислению изопропанола на вращающемся графитовом электроде.
Here you find cyclovoltammetric data for the oxidation of isopropanol to acetone:
Article On the oxidation of isopropanol on platinum single crystal e...
Is it possible to model a value which is considered usually constant as a time varying parameter, i.e., it's value is changing during the vehicle motion simulation. For example the stiffness of...
11 January 2020 5,715 1 View
I recognized that a membrane used for wastewater treatment in MFC was degraded, but I don't have an explanation, did someone have an idea? Thanks in advance
15 November 2019 2,742 3 View
I want to supply power to gate driver of DC-DC converter's IGBT. For that i have to get in consideration the input voltage of power converter (100kV). So in my part of power supply i have to use...
06 July 2014 7,981 5 View
Drive gate switch of DC-DC converter power, voltage of DC-DC converter from 25 kV to 5OO kV.
15 April 2014 1,912 7 View
When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...
03 March 2021 4,892 5 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
What does the color of a spiro-ometad film indicate? I got purple, green, red, even black color of the spiro film. Is there anything we can get from the preliminary color analysis(e.g. oxidation...
21 February 2021 1,831 4 View
The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...
18 February 2021 4,430 1 View
when I put my ZnS solution in the chemical bath, the ZnS oxidizes so there are ZnO peaks appearing because of the reaction with the oxygen in the air, despite the fact that I close the beaker...
14 February 2021 5,778 9 View
i have the enzymatic antioxidant assay by following the method of Misra and Fridovich, 1972 for super oxide dimutase and Luck, 1974 for catalase assay can any help me how to the calculation for...
11 February 2021 2,241 3 View
Hi everyone. I am working on metal oxides. I need to make some conjugates of drugs and NP. But I am unsure of what concentrations to make. I have read some articles, but they haven't mentioned...
10 February 2021 3,372 2 View
So I know some metal-insulators (ex VO2) have thermochromic infrared-reflective properties, but most of these are insulators at low temperatures and conductive at high temperatures. Some...
07 February 2021 1,770 3 View
I have a few questions related to PL (images attached for same material by 2 methods), It would be great to get some help. 1. What is the physical meaning of highly intense PL? Does this mean...
02 February 2021 1,791 3 View
I have deposited a metal oxide thin film of glass plate, A conductive thin film was also deposited on the glass substrate before the deposition of metal oxide film. How can I perform its CV from a...
01 February 2021 7,710 3 View