For magnesium- 10wt.% nanoceramic ball milling, what is the optimum condition (rpm, powder/ball ration)?
Is it necessary to use ethanol in cup?
You must try more than condition and select the best results, but in general (200-250 rpm and 1/10 pbr are favorable.
I want to measure the thickness of TiO2 on the surface of titanium. Please recommend some related techniques.
31 December 2015 2,552 11 View
I mean which lamp is suitable for investigating which materials by XRD? What is the differences between different lamps?
10 November 2015 8,092 6 View
After diffusion bonding of steel-W, which assays are recommended to ensure perfect welding?
09 October 2015 7,487 6 View
Please identify the: atmosphere of the cup? material of cup walls and ball? time and ....? to reduce the size of particles to nano scale.
09 October 2015 8,996 11 View
As the molds of SPS process are made of graphite, and titanium will react with graphite at high temperatures, so it seems TiC will forms at the walls of sintered parts and they could not be used...
09 October 2015 9,635 1 View
99% pure ethanol was used for maceration also alternate methods along with the temperature and time to concentrate the extract can be specified
31 July 2024 5,113 4 View
Kindly share a research paper that explains the effect of Methanol and ethanol treatment on collagen based scaffolds. How it increases porosity and swelling. Kindly help me find a paper. Thank you
24 July 2024 3,937 0 View
I run mechanochemical reactions that involves the use of a large amount of catalyst (1:1 molar ratio to the reactant). When I try to understand the effect of amount of catalyst on the reaction, I...
23 July 2024 9,938 1 View
Greetings. I’m currently running a nested pcr for giardia. My mastermix comprised of 3mM Mgcl2, 5unit of taq polymerase, 0.2uM of forward and reverse primers each respectively and 0.2mM of dNtp...
22 July 2024 9,761 5 View
My research work is related to the calcination of limestone. I have a complex question and would like to consult with experts in this field. Could you please advise which kiln to choose (a...
18 July 2024 1,390 2 View
I am searching for HPLC method to estimate Mirtazapine but i want to avoid HPLC-buffers as a mobile phase component. So, I am looking for alternative HPLC-solvent (acetonitrile, methanol etc.)...
14 July 2024 1,493 3 View
I am working on powder metallurgy, and during the compaction process, the powder does not pelletize and remains in its powder form. To address this issue, I am considering using binders to improve...
13 July 2024 9,003 2 View
I am trying to load curcumin emulsion in 4% chitosan gel but i don not know how many mg powder is needed ?
10 July 2024 2,462 1 View
https://youtu.be/5MckkqF9XWU?si=MvBsElJZg8_At8qP
09 July 2024 6,038 5 View
I have to compare the FTIR of the two samples, one is in powder form and other one is the powder dispersed in IPA or water. Both are same material, so how the bond will change
09 July 2024 8,011 2 View