Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Can anyone help or comment on solubilising chlorobutanol in aqueous injections in minimum time possible?

Please suggest solubilisation of chlorobutanol in injections. Tried pH and high temperature. But the issue is of assay drop. If anyone can suggest any solution. Its a commonly used excipient for...

21 February 2021 7,397 1 View

What is the difference between PBE and PBEsol functional?

Hello, I am a 3rd year chemistry student and I'm writing my project report on computational chemistry. does anyone know how PBEsol improves upon the PBE functional? Thanks in advance

19 February 2021 7,068 4 View

Can someone help me with this error that I am getting while estimating a VAR model in R?

I am using annual time series data to estimate a VAR model in R. However, when I run the command to find the optimal lag length, I get the following error: Fehler in VARselect(data, lag.max = 10,...

18 February 2021 9,647 3 View

In your experience what is the difference between G.652D and G.655D optical fiber. In field and in lab?

In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...

11 February 2021 4,006 8 View

How many dilutions are good enough for TCOD50 of SARS-CoV-2?

I started with 10e-1 till 10e-10. But when I searched for online calculator they mostly consider 5 dilutions. Is there a reason behind it or I should make less dilutions?

11 February 2021 5,839 3 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

Does Napabucasin soluble in dichloromethane and in ethanol?

I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...

02 March 2021 9,945 3 View

Why am i not getting solid after reacting APTES with salicylaldehyde?

The reaction of APTES with salicylaldehyde in ethanol leads to the formation of imine compound yellow solid which is mention in literature, but I am not getting yellow solid I don't know why? when...

28 February 2021 2,955 2 View

How to best wash a 96-well plate containing microplastic?

I am planning my protocol for my dissertation for an experiment quantifying bacterial (E. coli) biofilm formation on micro-plastic (5mm discs of polyethylene bags) by conducting a crystal violet...

23 February 2021 7,868 2 View

Are there any known solvothermal methods to synthesize MoS2 nanosheets using solvents other than water (like ethanol/ethanol-water mixture) ?

I need to synthesize MoS2 nanosheets by alternate methods without pure water as a solvent.

22 February 2021 9,246 1 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

Can ethanol be used as an analgesic?

If ethanol has analgesic properties, why isn't it used for clinical purposes?

18 February 2021 8,227 4 View

What is the best way to isolate Hydrolysable tannins on Sephadex column?

I am currently preparing to isolate polyphenolics (Hydrolysable tannins) from aqueous extract of a plant. I want to set up a small sephadex column to guide the major isolation on a laerge...

18 February 2021 1,455 3 View

Can any suggest me good method of GC MS for the separation of Flavonoids?

I prepared the ethyl acetate, ethanol and butanol fraction from the ethanol extract of seed for isolation of Flavonoids. Amongst them ethanol fraction showing shinoda test positive for polar...

13 February 2021 8,263 3 View

In Method prepreation, what is the meaning of (Fixed at), and the meaning of (mol% of somthing) and how to find the volume?

I need an explanation of this sentence: Firstly, SnCl4.5H2O with fixed at 0, 1, 3, and 5 mol% of TiO2 and Titanium (IV) isoproxide (TTIP) with fixed at 10 ml were mixed into 150 ml of ethanol...

10 February 2021 3,291 2 View