What is the lowest possible thickness for Graphene channel layer?

More Muhammad Navid Anjum Aadit's questions See All

Can you please suggest me a simulator for Phosphorene FET with built in material?

Is there any simulator for Phosphorene FET? I assume Comsol or Silvaco may not work....

04 May 2018 4,245 5 View

Which one is the best simulator for 2D material FETs?

for example, WSe2, graphene etc

04 May 2018 4,225 2 View

Can you suggest me a windows based simulator for 2D material FETs?

Any windows simulator other than Linux based NanoTCAD Vides?

03 April 2018 8,414 2 View

Energy minimization in LAMMPS using NVT ?

How do I do energy minimization in lammps with NVT ensemble ? I am using the following command and it does not seem to work. It stops at extremely high energy and gives me the error zero search...

01 March 2021 2,294 3 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

Why is the sum of the elements in a row in a Q matrix equal to zero?

When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?

28 February 2021 3,864 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Why the CHi^2 is close to zero with a bad fitting but the Rp and Rwp are still high?

I am refining my XRD data using in FullProf program. The intensity of the modulated X-ray peaks is almost flat. I tried to adjust the peak intensities but unsuccessful. What is the reason? I guess...

23 February 2021 2,304 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

Can we use a compensation matrix with single staining that the negative population for each single staining is below zero?

Recently we used single staining to make a compensation matrix. But, for each single staining we saw that 13 to 25 percent of our negative population had been shown below Zero. In this situation...

21 February 2021 9,982 2 View

How to compare means of continuous data with zero-inflation and skew?

I have two groups (unpaired) of plant biomass measurements and want to know whether there is a test that can be used to determine statistical significance where assumptions are not violated. The...

18 February 2021 1,258 4 View

Raul D. Rodriguez

0.3 nm, that is the thickness of single layer graphene.

Shawana Tabassum

Hi Aadit,

No, you can go down to single layer graphene.

You can check this: http://iopscience.iop.org/article/10.1088/0957-4484/27/12/125704/meta

Muhammad Navid Anjum Aadit

Got the answer.

Thank you Prof. Rodriguez

Thanks Shawana Apu.