What is the chromic anodising standard used for coating the Al2024-T3 sheets used GLARE fiber metal laminates?

10 October 2017 0 1K Report

I have seen online that there are a number of chromic anodizing standards used in the industry but not sure which one is usually used for coating Al2024-T3 sheets used in GLARE fiber metal laminates.

These are some of the stadnards I found online:

ISO 7583:2013Def Stan 03-24

MIL-A-8625 Type 1

Def Stan 21-5/2-2

MIL-STD-171 7.1.1

TS 112 D1

JP 213 Method 2

ASTM B580 Type G

Badges
Science topic

More Khaled Giasin's questions See All

Crushable foam modelling in Abaqus?

Dear all, I am modelling foam compression in Abaqus using the crushable foam model and hardening option. the model requires two data values which are the compression yield stress ratio K and the...

11 December 2018 4,422 3 View

What is the largest thickness of GLARE fibre metal laminate ever/currently produced for real applications, a reference would be great?

I am trying to find out what is the largest thickness of GLARE fibre metal laminate every produced or currently used in actual applications. if there is a reference that would be even better. many...

02 March 2017 3,213 5 View

Can someone help with underestimated thrust force Fz in drilling Al2024 using Abaqus?

Hi All, I am simulating the drilling of Al2024 on Abaqus using JC model, when compared with experimental data, I found that the thrust force Fz in my model is highly underestimated > 50% with...

04 May 2015 4,368 5 View

What is the effect of fiber orientation (unidirectional, cross ply) on the thrust force and torque when drilling composites?

one of the questions that came into my mind suddenly was to know if drilling a unidirectional composite would require less cutting forces than that for drilling a cross ply orientation one with...

05 June 2014 5,947 3 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View

What is the best surface to culture cells isolated from a skin biopsy?

Hello, recently I am having some difficulties with maintaining the cell culture of primary cells isolated from a skin biopsy (normal and malignant). The coating of culture plates with Matrigel (a...

26 February 2021 6,151 2 View

How can we limit artifacts caused by rotation in fiber photometry?

We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...

25 February 2021 568 1 View

Unknown debris sheets observed in cell culture flasks?

Hi, We culture neural progenitor cells in T175 culture flasks coated with PLO-Laminin. We have successfully grown these cells with our protocol for months. Recently, we observed large sheets...

25 February 2021 3,443 4 View