Khaled Giasin

5 Questions 11 Answers 0 Followers

Questions related from Khaled Giasin

Crushable foam modelling in Abaqus?

Dear all, I am modelling foam compression in Abaqus using the crushable foam model and hardening option. the model requires two data values which are the compression yield stress ratio K and the...

12 December 2018 4,451 3 View

What is the chromic anodising standard used for coating the Al2024-T3 sheets used GLARE fiber metal laminates?

I have seen online that there are a number of chromic anodizing standards used in the industry but not sure which one is usually used for coating Al2024-T3 sheets used in GLARE fiber metal...

10 October 2017 1,109 0 View

What is the largest thickness of GLARE fibre metal laminate ever/currently produced for real applications, a reference would be great?

I am trying to find out what is the largest thickness of GLARE fibre metal laminate every produced or currently used in actual applications. if there is a reference that would be even better. many...

03 March 2017 3,236 5 View

Can someone help with underestimated thrust force Fz in drilling Al2024 using Abaqus?

Hi All, I am simulating the drilling of Al2024 on Abaqus using JC model, when compared with experimental data, I found that the thrust force Fz in my model is highly underestimated > 50% with...

05 May 2015 4,405 5 View

What is the effect of fiber orientation (unidirectional, cross ply) on the thrust force and torque when drilling composites?

one of the questions that came into my mind suddenly was to know if drilling a unidirectional composite would require less cutting forces than that for drilling a cross ply orientation one with...

06 June 2014 5,981 3 View