Dear Mujalid,

You can mix ZnS with SnS2 at nano particle scale with the required mixing ratio.

To join them on the atomic scale you can heat them up to a proper temperature which you get it experimentally. when you mix the two materials you will get a compound with an intermediate band gap.

Best wishes

Dear Mujalid,

You can mix ZnS with SnS2 at nano particle scale with the required mixing ratio.

To join them on the atomic scale you can heat them up to a proper temperature which you get it experimentally. when you mix the two materials you will get a compound with an intermediate band gap.

Best wishes

dear Mujahid Muhammad

the incorporation of Zn leads to increase the light sensitivity by 7·5%. The best way for doping zinc in SnS2 thin films that have been deposited on glass substrates is by using typical spray pyrolysis at Ts = 360 ◦C. you can read more details in this reference;

Effect of Zn doping on optical properties and photoconductivity of SnS2 nanocrystalline thin films

https://www.ias.ac.in/article/fulltext/boms/036/03/0411-0416

Dear Mahmood Hameed M. Abdelhalim Zekry Thank you very much for your response.

Following..

thanks Mahmood Hameed M.