among the different techniques for oil desulphurization (such as HDS, BDS, ODS, ...) which is more appropriate for heavy oil?
The following reference answers your question and recommends desulfurization of heavy oils by autoxidation followed by thermal decomposition of the oxidized heavy oil.
Article Desulfurization of heavy oil
The est is HDS.
regards
G
Hi,
According to what I studied for master degree, I think that mixed of HDS and adsorption by adsorbents is the best for desulfurization.
Regards,
Somaye
Is it possible to break a π bond between a solute and a magnetic solvent using magnetic force?
31 December 2018 1,040 3 View
among the different types of hydrocarbons such as aromatics, aliphatics, naphtenics, etc which is more refractory to the oxidation process?
06 July 2018 6,334 8 View
which of the available techniques for desulphurization of the oil is more effective?
05 June 2017 3,040 10 View
i want to convert mass fraction to volume fraction. so i need density of the samples (graphene oxide and alkylated graphene oxide)
07 August 2016 9,655 2 View
i performed a MD simulation in NVT ensemble using berendsen thermostat, now, one of the reviewers says that NVT ensemble is based one Nose-Hoover thermostat not berendsen I got a little confused
01 February 2016 949 11 View
Is it possible to break bonds between for example C-C or C-H atoms, Using ultrasonication?
31 December 2014 235 0 View
Are there any nanoparticles which can decrease the viscosity of a liquid?
31 December 2014 5,352 21 View
Graphene is anisotropic and dimensions are different, so which dimension will be considered in DLS test?
10 November 2014 3,269 7 View
I want to render a polyester resin that is water soluble. What do I have to do? I know to use some materials like ammonia and amines but I don't know the procedure.
02 March 2014 1,483 1 View
I want use GO in a medium that should be warmed.
01 February 2014 3,234 3 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,329 0 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it
06 August 2024 947 1 View
I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II
05 August 2024 5,291 2 View
Reference dose and Maximum acceptable concentrations HMs
03 August 2024 8,230 4 View
I want to know more about petroleum deposits in Iran.
02 August 2024 8,725 3 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View