What is the best coating method of nanoparticles on ST37 steel?

More Zahra Sajadinia's questions See All

How to completely dissolve soy lecithin?

Hello, I'm looking to dissolve soy lecithin in order to create a liposome. I've tried using various solvents like pure ethanol, methanol, and a mixture of ethanol and methanol but they didn't...

02 August 2024 6,980 4 View

When using NVivo software for data analysis, is it necessary for the researcher to also manually analyze the data?

it's my first time using NVivo software.

01 August 2024 9,304 5 View

How to convert a potential collected with reference to Saturated calomel electrode to Reversible Hydrogen Electrode?

I have collect a LSV data by taking SCE as the reference electrode. But I want to convert this one to Potential with respect to Reversible Hydrogen Electrode. Please suggest me the required...

13 July 2024 7,841 2 View

Regarding solubility of Dorsomorphin in DMSO ?

I'm using Dorsomorphin (C24H25N5O) as one component in dual SMAD inhibition of pluripotent stem cells to differentiate into neurons alongwith SB431542. Now as to solubilizing 10mg SB in DMSO for...

11 July 2024 4,832 0 View

Is it a source for moisture factor in different plants?

Is it a source for moisture factor in different plants? I need to find moisture factor (oven dry weight / wet weight) in plants in different studies.

10 June 2024 842 0 View

How can I clean autoclave (PTFE) from sulfur contamination ? in all aspect of color, smell and existence of Nano particle of sulfur??

the autoclave has been smelly and seem likely yellow after my synthesis and this changes may effected on other synthesis, so I want to clean PTFE from all sulfur contamination that remain on...

31 May 2024 2,985 0 View

What's the optimal temperature for freezing a lipopeptide solution before lyophilization?

I have a lipopeptide solution that I intend to lyophilize in a few days. Should I put it in the -20 freezer or -80? Which temperature is best for maintaining its properties?

20 May 2024 3,893 0 View

Challenges in Identifying Crack Initiation and Interpreting Results in Abaqus Direct Cyclic Fatigue Simulation?

Dear researchers, I'm currently conducting a direct cyclic fatigue simulation in Abaqus, but I'm encountering difficulties in analyzing the results. Despite the simulation running, I'm struggling...

04 May 2024 6,957 2 View

Cloudy background of polyacrylamide gel after de staining, a confusing problem?

Hello. My polyacrylamide gel becomes cloudy after de staining with a solution consist of (50% miliQ water + 40% methanol + 10% acetic acid) and the background of my gel does not become completely...

02 May 2024 895 2 View

Fail OCR measurement for my ReN differentiated cells?

I seeded 30000 ReN progenitor cell on XF96 plate which coated with matrigel. I differentiate them for 2 weeks and read OCR with inhibitors. However nothing worked. FCCP and oligomycin were same...

17 April 2024 9,012 0 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Best Practices for Constructing and Maintaining Gravel Roads in Rural Areas?

Hello, I'm involved in a project focused on constructing and maintaining gravel roads in rural areas. We're particularly interested in ensuring durability and reducing maintenance costs over time....

29 July 2024 9,623 0 View

Will the catalytic effect of retained austenite happens in steels including RA?

The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...

27 July 2024 8,508 0 View

Please investigate the effect of temperature and strain rate of hot deformation and the formation of delta ferrite in martensitic stainless steel 410?

25 July 2024 9,408 0 View