What is best way which can give me good results i mean i do chemical activated first then pyrolysis or pyrolysis first then chemical activated?

More Abderrahim Khelfaoui's questions See All

How can I remove the border of the lineaments image extractcted using Geomatica program ?

Dears community When I extract lineaments from the Landsat 8 image, the output image has a red border that looks like the lineaments, which may disturb the interpretation. Regard

19 July 2023 471 0 View

How can I export a well-section from Petrel software?

Hello all, How can I export a well-section from Petrel software? I can't save it as CGM or PDF format, because of this error message "enable to find sdi export driver for type CGM".

14 June 2023 2,538 2 View

Dears scientific community. Can I find a lineaments Map of the entire Morocco ?

Dears scientific community Can I find a lineaments Map of the entire Morocco? Thanks

28 May 2023 8,633 0 View

Can I take its theoretical max adsorption capacity as a result my study?

If Langmuir model is not the right model to explain my adsorption equilibrium data (R2 = 0,9066). Can I take its theoretical max adsorption capacity as a result my study? Because I want to compare...

23 May 2023 5,973 1 View

Hello. I have published a paper in a scopus indexed journal, but After the publication the journal was deleted from scopus database. What Can I do ?

Hello Every one Dear scientifics community I have published a paper in a scopus indexed journal, but After the publication the journal was deleted from the scopus database. NB: during the all...

20 May 2023 2,744 3 View

How can i fix the issue of "An error occurred while attempting to fit the model" when conductiong CFA & SEM using AMOS?

Hello, What is the cause of following issue, when I tried to conducted CFA / SEM in AMOS NB: I’m using a sample size N=15 An error occurred while attempting to fit the model The sample moment...

29 April 2023 4,495 11 View

Which virus is used to assess the quality of concentration and extraction of rotavirus?

we often use mengovirus or MNV .. to assess the quality of concentration and extraction of Norovirus given their similar physical and biological properties, please which virus is used to assess...

15 March 2021 696 2 View

How to get free Seismic data of Morocco?

Hope you are doing well, I am searching for seismic data of Morocco. Is there any way to get them for free. Best Regards

03 March 2021 1,104 6 View

Should I use Pressure Based Solver or a Density-Based Solver?

Dear researchers, I want to simulate a flow (air) in a wind tunnel, and I want to integrate a fluidic actuator inside it in order to control the separation of the boundary layer. At the blower...

22 February 2021 5,266 3 View

Using APSIM as an exploratory tool to simulate crop diversification-based scenarios in France?

Hi everyone, I want to know what do you think about using APSIM for simulating new cropping systems based on crop diversification (in space and time) under an oceanic climate in the north of...

29 November 2020 8,258 4 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Aspen Plus Simulation?

Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...

06 August 2024 5,023 1 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

What are the perfect mathematical model for a solar-powered ship implementation?

A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids

28 July 2024 4,985 1 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

What is the principle/mechanism behind aging of carbon (graphite) containing refractory mix for isostatically pressed refractories?

The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.

23 July 2024 3,205 0 View

Md. Rafsan Nahian

pyrolysis first then chemical activated

Henrik Romar

Why not combine them in series, make the chemical impregnation, dry, do the pyrolysis and activation in a one-step process?

Zhonghua Yao

commonly, we should soaking by chemicals before pyrolysis, then pyrolysis, chemical activation.

Abderrahim Khelfaoui

Md. Rafsan Nahian,Pramod K Kalambate,Henrik Romar and Zhonghua Yao

Thank you so much for your answers, I will take your answers in consideration