There are many simulation systems to simulate wireless sensor networks working under unix and linux (ferdora, ubuntu ,) as opnet , omnet , and ns2 , and there is no system work under windows 8.1.
OPNET is good with windows 8
omnet++ is working on windows 8.1 which a open source.
the odd polynomial with odd power used in many mathematical and engineering fields especially in the DSP fields. what is the mathematical analysis of the odd polynomial G(x)=x^5+x^3+x?
11 December 2017 7,160 2 View
In the ANN , they suppose there are sufficient knowledge about the correct results of the problem? I work to solve a problem without any information about the sources, by using one of the...
08 September 2017 3,031 7 View
RBF (Radial Basis Function ) is one of the unsupervised neural networks used for many applications as classification and source separation. There is source code , in MATLAB , for RBF used to...
08 September 2017 6,599 0 View
07 August 2017 8,692 10 View
06 July 2017 4,602 0 View
how I can find speech samples with high frquency .wav?
10 November 2016 9,647 0 View
in the ICA technique depends on main factor is the nongaussinity.
08 September 2016 7,273 0 View
there are many methods of the optimization , linear and nonlinear also first order and second order but : there are meta-hurestic methods? what are?
07 August 2016 4,013 1 View
the independents component analysis is statistical analysis approach used to solving the blind source separation problems, such as speech signals and/or images
06 July 2016 9,131 2 View
there are many simulator systems to simulate the wireless sensor networks working and the matlab system used to build many applications ?
06 July 2014 5,767 4 View
When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.
16 June 2021 0 0 View
Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...
02 March 2021 2,431 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...
01 March 2021 9,537 2 View
Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...
01 March 2021 9,332 6 View
I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...
01 March 2021 6,661 3 View
Hi In Molecular Dynamics Simulation, how do I make changes to the force field according to my protein? I got this error in the add-ion stage: Fatal error "./ amber99sb-ildn-HHH.ff / force...
01 March 2021 8,747 4 View