what is adjusted R2 value in response surface methodology?
i have determined maximum wavelength of my dye wastewater. How to determine initial concentration of dye wastewater and name of dye in it?
05 June 2018 6,849 6 View
Kindly suggest few models which are best and simple for fixed bed column study?
08 September 2017 827 1 View
How to calculate external mass transfer coefficient for fixed bed column fiiled with the adsorbent pellets?
07 August 2017 9,207 3 View
How to contact googlescholar for wrong citation?
05 June 2017 2,985 7 View
How to calculate mass transfer coefficient and axial dispersion coefficient. when only following parameters are known 1.Bed height 2.Flow rate 3. Inlet adsorbate conecntration 4. External mass...
05 June 2017 6,679 1 View
If i am working on a column filled with adsorbent, in my batch study max adsorption capacity was achieved in 1 hr. In continous column how can i achieve that max adsorption capacity that was...
05 June 2017 4,279 7 View
Does anyone have any experience with "Environmental Engineering and Management Journal" with ISSN 1582-9596 and IF - 1.008. On their website they instruct to mail your research paper directly on...
05 June 2017 8,527 0 View
In my model of matlab for fixed bed adsorption column, i have obtained very large time in X-axis of breakthrough curve..i.e nearly 5*10^(5) second. Is it possible? why it is higher. please suggest?
04 May 2017 1,314 4 View
I have used BET to determine surface area of my adsorbent (cellulosic material) but nitrogen does not adsorb on its surface. Only one point is available. Please suggest how can i measure its...
04 May 2017 6,204 3 View
How to make pellets of acid treated wheat bran ? It is similar to activated carbon..we made pellets using pelletizer using clay as a binder..pellet is perfectly made but after dipping in water it...
03 April 2017 218 0 View
If the detection range is in ng/ml but the reference range is in ug/ml for a molecule or protein in serum or plasma .how to dilute and what is the initial volume to be taken for quantitative analysis
02 March 2021 7,670 3 View
Please provide Book Title and author name
02 March 2021 9,059 3 View
01 March 2021 3,905 5 View
As random sampling means that everyone in the population have an equal chance to be chosen, can it have inclusion criteria? My research participants have been chosen based on the inclusion...
26 February 2021 6,905 10 View
For a source to be considered reliable it must contain accurate historical information. But how does one determine the accuracy and reliability of sources in modern and recent history since not...
23 February 2021 1,346 13 View
Hello, I fit a classical dose response curve Y=Bottom + (Top-Bottom)/(1+10^((LogEC-X)*HillSlope)) to my data (not related to inhibitors etc). The model I use is purely qualitative but it fits...
23 February 2021 8,155 5 View
I know, or think I do, the basic idea behind these natural structures, as from what I know they form due to water dripping from the top leaving a salt deposit behind. But started to wonder about...
22 February 2021 1,400 4 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
I was wondering if anyone knew how to perform the Haldane correction for SPSS (this is the definition of the correction -...
21 February 2021 2,882 1 View
Basically, I would like to know how to treat or coat on the uncoated bare TiO2 (Ti-OH rich) surface with polymer which has anchoring groups in the polymer structure like trimethoxygroups. What is...
21 February 2021 4,657 6 View
