What effect does opening have on buckling of the coupled steel shear wall?

Amin Ramezan Titkanlou @Amin_Ramezan_Titkanlou

06 June 2018 0 2K Report

Badges
Science topic

More Amin Ramezan Titkanlou's questions See All

How can I create a HE-A profile on Abaqus?

How can I create a HE-A steel profile on Abaqus? (the section of floor beam of a eccentrically braced frame and it's vertical shear beam is from HE-A)

07 August 2018 2,410 0 View

How does hybrid concrete improve the energy absorption of concrete?

The reasons of improvement of the energy absorption of concrete with hybrid concrete.

06 July 2018 8,355 0 View

What are the necessities of brainstorming season in scientific conferences?

What are the necessity of brainstorming season in scientific conferences ,for example 17th world conference of earthquake engineering or each other conferences.

06 July 2018 1,533 0 View

What materials is in hybrid concrete?

The materials that hybrid concrete is produced from them.

06 July 2018 6,597 0 View

What are the advantages of using hybrid concrete?

The advantages of using hybrid concrete in structures?

06 July 2018 8,717 0 View

What is the types of hybrid concrete?

Types of hybrid concrete in terms of performance and ingredients?

06 July 2018 9,909 0 View

How to improve the strain of a concrete beam?

How to improve the strain of a concrete beam to the extent of the strain of steel ?

06 July 2018 8,069 2 View

What is the structure of hybrid concrete?

Benefits of using Hybrid Concrete Construction

05 June 2018 5,829 0 View

What is the effect of the fiber in concrete on the hardness and energy absorption of the coupled shear wall?

Laboratory and numerical

05 June 2018 2,317 0 View

What effect does fire after earthquake have on the strength of a concrete column?

With compressive and tensile strength approach

05 June 2018 3,773 2 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Is it possible to do piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch?

How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...

02 March 2021 9,833 3 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

I need to accelerate corrosion in steel parts that are used in a salt-water environment. Is there a technique for doing so?

I have a structure that employs d-ring swiveling tie-downs that corrode during use and become "frozen". I have sample swivel assemblies that I wish to corrode to see if I can free them using one...

01 March 2021 3,739 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

What are effects of steel jacketing on flexural strength?

Dear all, If steel jacketing is used to retrofit a reinforced-concrete (RC) column, can we use it to improve flexural strength? I understand that we leave gaps between the ends of the jacket and...

22 February 2021 1,906 5 View

How to model steel jackets using SeismoStruct?

Hi all, Does SeismoStruct support modeling rectangular RC columns retrofitted with steel jackets (e.g. rectangular, elliptical) ? Any suggestions for other software (apart from...

20 February 2021 4,521 1 View