I want to get a film of nano fibre by electrospinning method,I made that by using ethanol and water as solvent but failed to get. Except anhydrous ethanol/2-propanol what are suitable solvents for the same.
I want to know the name of solvents other than Formic acid.
10 November 2019 2,477 1 View
I want to make a thin film of dielectric material using thermal vapor deposition technique. So sublimation graded material is required for this purpose. If some one tell me it will be helpful to me.
08 September 2018 8,530 0 View
We know electronegativity is an atomic property. When we move to the broad context to a material (i.e. polymer) then can we calculate electronegativity of that material?
11 December 2017 6,075 5 View
I need a PVA thin film. I have made PVA hydrogel where DI water was used as solvent. How can I get thin film from Hydrogel?
04 May 2017 579 0 View
I have to make a Schottky diode by using PbS as semiconductor and ITO as metal, for this purpose an uniform PbS film of thickness 250-300 nm is required. What should be the concentration of sample...
10 November 2016 998 1 View
10 November 2016 2,933 0 View
07 August 2016 1,626 3 View
We know after application of electric field if we remove field than a polarization remains which is remnant polarization. But is there any polarization which a material posses before application...
07 August 2016 6,458 4 View
How can we measure work function of a polymer? As it has an important role for charge generation when the material comes in contact with metal/non-metal/polymer. So if anyone suggest me how to...
01 January 1970 5,184 3 View
Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...
03 March 2021 5,978 5 View
I anwar by adsorption or reaction ..but it is either more method...
02 March 2021 4,811 2 View
I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...
02 March 2021 9,945 3 View
I took measurements of different concentrations of 15 nm and 5 nm Au nano particle solutions. I'm trying to determine which concentration I measured gives the best reading overall. I also...
02 March 2021 7,626 1 View
I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...
28 February 2021 298 3 View
The reaction of APTES with salicylaldehyde in ethanol leads to the formation of imine compound yellow solid which is mention in literature, but I am not getting yellow solid I don't know why? when...
28 February 2021 2,955 2 View
27 February 2021 2,753 4 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View
In the formation of Zno nano particles process, after drying at 120 degree C, my zno nano particles are completely white but when i calcine it for 450 degree C it converts into grey colour. i...
26 February 2021 2,435 4 View
I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...
25 February 2021 2,615 3 View