What are the recent analytical procedures for classification of primary Aluminium and metal scraps?

01 January 1970 0 4K Report

The metal analysis is conventionally carried out by emission spectroscopy,which automated to provide high sample throughput.There are different problems like collecting sample at high temperature and time consuming process.

Badges
Science topic

Similar topics
Data Mining
Classification

More Lala Behari Sukla's questions See All

Can Humans make new brain cells?

What Research Tells Us About the Birth of New Brain Cells The above research is considered important as is suggests that there are factors that can stimulate and inhibit the process of adult...

02 March 2019 7,046 15 View

What are the importance of Heterotrophic Microorganisms for Mineral Industries?

Mining of metals has been integral to the development of human civilization. As higher-grade ores become depleted, the primary ores that are processed by mining companies are increasingly of lower...

07 August 2018 6,264 1 View

What is the role of materials science in future technology and education?

There is a crying need for material science to be treated in depth.

07 August 2018 9,213 5 View

What Concrete steps to be urgently taken towards a low carbon footprint?

Recent environment regulations have mandated industry to comply with new emission regulations, not only on particulate matter, but also on gaseous emissions, heavy metals and water. Regulators...

05 June 2018 9,957 66 View

What are the new improvements that make LED a powerful tool for lighting systems optimized for photosynthesis?

Microalgae cultivation holds great promise for the production of high value–added biomolecules, bioenergy, and more. To grow microalgae in photobioreactors, artificial lighting systems must be...

10 November 2017 5,211 6 View

What is the importance of zero energy waste process flow?

Process flow modelling could be the basis for the creation of a suitable approach by mapping the lifecycle of Material, Energy and Waste (MEW) process flows.

10 November 2017 8,849 4 View

What are the recent new technologies to treat mine waste water?

Mining is water intensive and is estimated to generate hundreds of millions of tonnes of wastewater each year. Mining industries are under pressure to contain, control and clear up mine waste...

09 October 2017 7,170 3 View

What are the measures to control and minimize all three types of Pollutants air,water and soil?

The World Commission on Environment and Development (WCED), also called the Brundtland Commission after its Chairman Gro Harlem Brundtland (a Norwegian physician), was an international commission...

08 September 2017 3,200 3 View

What are the new developments in algae oil production systems?

New successful development of algae-based biofuels and co-products industry needs the optimum combination of technical innovations in systems.The processes,coupled with economic feasibility in...

08 September 2017 1,067 5 View

What are the technology available for utilization of low grade iron ore?

To tackle the shortage of iron ore, we must utilize low grade iron ore/ tailing. Steel production in India, which consumes only 59 kilograms of steel per person compared with a world average of...

08 September 2017 8,748 4 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Can you connect an HPLC to a Mass Spec only at a certain time point?

Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...

11 August 2024 8,141 3 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View