When do I start applying for PostDoc position?

I just have completed my 4th year in PhD. I have recently got acceptance from a prestigious fluid mechanics journal "Journal of Fluid mechanics. My second journal for submission is underway. I...

05 July 2020 7,412 4 View

Could anyone provide information about the significance of calibration frequency and its value for CMG3T-120 seismometer with Reftek-130 as Digitizer?

Actually I want to calculate instrument response constant for correction of instrument response of CMG3T-120 seismometer.The formula to calculate that can be given as...

06 March 2020 6,384 1 View

Determination of wavelength in Raw effluent?

Is there a procedure to determine the wavelength of an industrial untreated raw effluent using spectrophotmeter

24 February 2020 1,931 3 View

PEG-400 or PEG-4000 can be used as an alternative to PEG-1000 ?

I use PEG-1000 (poly ethylene glycol) in my synthesis process, but I only have PEG-400 and PEG-4000. So, what is an alternative to PEG-1000 ?

19 February 2020 2,142 3 View

Why is there an unrealistically low PM2.5 concentration estimated using WRF-Chem V3.9.1?

I am conducting experimental simulations to study the PM 2.5 concentration.I have tried several chemistry options ranging from RADM2 MADE/SORGAM to MOZCART aerosol chemistry. The simulation...

21 October 2019 8,154 4 View

What are all the possible reasons for Spontaneous symmetry breaking in a double quantum well system?

Dear frnds, From my point of view SSB is happening due to following reasons in double quantum wells. 1. Due to variational technique 2. symmetry in envelop function and...

19 October 2019 6,248 2 View

Can we consider hemagglutination assay for dengue virus as a quantitative method???

For a pure virus, HA can be considered as a way of representing their titre. even though it is cost effective and less labor intensive, it is less concerned. Kindly guide me in this matter.

04 July 2019 3,881 1 View

What is the significance of size dependent dielectric screening in optimizing excitonic properties?

Mott-Wannier excitons are formed in a semiconductor material as a result of light-matter interactions. However, their delocalizing properties inside the crystal induce screening effects in their...

10 February 2019 6,737 1 View

how to specify ambient temp in a heat exchanger simulation in Sub-ambient simulation in ansys fluent?

Heat transfer is between fluid (water) in a pipe placed adjacent to an array of small heat sources, temperature at fluid inlet is less than ambient, How do i specify the ambient temperature (of...

18 June 2018 7,345 3 View

What approach can be used to teach fraction concepts and the approach need to be based on constructivism theory?

Hi I need help for my thesis. My thesis is about teaching fraction concepts for primary pupils and I struggling to identify the appropriate constructivism learning approach.

17 June 2018 5,152 8 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View