What are the best suited materials and electromagnetic methods for programmable imaging?

08 October 2013 1 667 Report

Digital light processing and Digital micro-mirror devices are the next generation communication systems that offer better spatial control and characteristics. What are the best suited materials and electromagnetic spectral configuration for this purpose.

Doug Dykaar

Historically, micro-mirrors and MEMS have benefitted from the capabilities of silicon process technologies, offering small feature size, low cost and high yield.

Badges
Science topic

More Gokul B Alex's questions See All

How should I go about evaluating cytoplasmic and nuclear Arginase-1 activity?

Hello! I've stained some bright field Arginase-1 Hematoxylin slides, but I'm having a hard time finding any computed histology predicates for evaluating the intensity of the cytoplasm verses the...

03 February 2021 3,039 1 View

Does anyone know why I would have unexplained emission overlap for flow cytometry?

Hello, I am new to flow cytometry, and was just using a sample cell population to train with the technician. The cells were PAC-1 cells split into four groups. Unstained, transiently transfected...

28 January 2021 969 2 View

Does anyone know of a library for R that includes phi?

I'm looking to produce some phi correlations and I'd rather not do it manually, but I can't find a library for R that includes phi.

18 January 2021 2,808 9 View

In SEM, how to interpret standardised regression weights and their significance?

I have a SEM model that I'm having difficulty interpreting. It has one direct effect with a Beta/standardised regression weight that appears to be high (0.80) and significant (p

31 December 2020 7,604 6 View

Does anyone know how to add custom text to a violin plot in r, ggpubr made using the ggviolin line?

I've produced a violin plot for a point-biserial correlation. Main title is there, x and y are labelled, but I want to add a custom text box with the correlation coefficient and significance...

26 December 2020 4,480 4 View

How do I interpret these correlations and p-values?

I've just run a series of point biserial correlation tests in R between whether or not characters were assigned national identities, and attributions given to their behaviours - results shown in...

17 December 2020 9,825 4 View

Is it possible to fuse Deep Learning Net and Clustering Algotrithm?

What I did (unpublished yet) is extract several (e.g. 16) mask features within Mask R-CNN from multiple images, construct a distance metric to compare them to predict the image class. Each set of...

13 December 2020 9,504 2 View

Are there models trained+evaluated on multiple datasets?

Generalization of COVID-19 models is a very serious challenge. I'm trying to find a model (ct scans or x-rays) that was trained and evaluated on multiple datasets. It would be particular...

03 December 2020 8,863 4 View

Are there models trained on both x-ray and ct scans for COVID-19 prediction?

I've only come across models that were trained and evaluated on one of these data. I don't see why it would be a problem to do both, as there are many similar features.

03 December 2020 8,310 3 View

Could anyone suggest me what is the best way/method to isolate total RNA from the platelets?

I have tried to isolate platelet total RNA from the human and sheep blood using TRIzol reagent. After isolation of platelets from the blood samples, total RNA extracted, and quantified using...

02 December 2020 6,165 4 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Can impedance of antenna be less than 50 ohms?

I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...

27 February 2021 4,218 7 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Has anyone used the Illumina ITS1 primer sets?

Hi everyone, Illumina provides a list of primers to amplify with high taxonomic coverage the ITS1 region for further fungal sequencing, but I cannot find the exact amount necessary of each...

25 February 2021 6,969 3 View

How to calculate battery consumption for IoT device?

Hi, everyone I'm working on a privacy-preserving algorithm that will apply to IoT devices. So, I need to measure the power consumption by implementing this algorithm. Any suggestion, advice,...

25 February 2021 8,749 6 View