The mzi Rsoft simulation results are not satisfactory. can anybody help work out this question?

27 October 2023 0 548 Report

I designed an mzi structure where the input is complete, but the output changes badly at the end of the coupling zone.How do I need to change the structure？

Badges
Science topic

Similar topics
Physical Sciences
Optics

More Tianyu Chong's questions See All

Urgent: Survey instrument from previous study about customer churn behavior?

Dear all researchers, I would appreciate if anyone here can assist me to find a survey instrument related to customer churn behaviors from previous study? I couldn't find it. Thanks.

19 May 2024 1,184 0 View

How can isolate C2C12 myotube efficiently from C2C12 myoblast?

18 April 2024 6,123 0 View

How can the input shaper be designed for use in 6-Dof robots, or to resist the effects of time-varying natural frequencies on robots?

1. When using the input shaper, it is necessary to design the natural frequency and damping ratio. How to solve this natural frequency and damping ratio for the time-varying robot dynamics...

10 April 2024 378 0 View

What are the best ways to deal with the problem of federated learning heterogeneity?

In the actual scenario of federated learning, the problem of heterogeneity is an inevitable challenge, so what can we do to alleviate the challenges caused by these heterogeneities?

19 March 2024 7,047 2 View

How to solve my error for BH1750 as a luxmeter for 650nm laser source?

I have encountered an error to measure the light intensity of my laser source (650nm) (see image attached). The serial plot remains constant even i have changed the intensity of my light source, I...

06 January 2024 4,725 3 View

Hi there, if I'm using a GL55 photoresistor, will 650nm or 532nm laser be better to determine bacteria concentration?

Specifically, I would like to determine the concentration of Marinobacter hydrocarbonoclasticus. Just like a UV-Vis, I will be using a GL55 photoresistor (as shown in the image attached) to...

20 November 2023 7,905 2 View

How to assign a reference point to a set in ABAQUS via Script?

Hello, I would like to script the creation and assignment of a reference point to a geometry set in abaqus. In the .jnl file the code is:...

14 November 2023 662 2 View

Is the following propose conceptual model correct / workable?

I am a master student, can any expert suggest is the model suitable for my level or this is more advancing for PhD level? The proposed title for this research is: Investigating the Drivers of...

10 October 2023 8,366 1 View

How to carry out inter-rater reliability assessment in a retrospective chart review study?

I am planning a retrospective chart review study using data abstraction form. My questions are: 1) How many number of cases/percentage of cases to be selected for inter-rater reliability...

14 September 2023 7,448 0 View

Sample preparation for flow cytometry analysis?

Hi, I currently using flow cytometer to performed multiple assays including Annexin V/PI staining, MitoSOX/BODIPY staining, as well as usual protein count analysis (with specific primary...

26 August 2023 8,666 1 View

How to create a ridge waveguide at 70-degree angle by Rsoft software ?

Hi everyone, in Rsoft there are choose to select ridge waveguide, However the profile index is step ( 90 degree-angle ) so, i want to create ridge waveguide at 70 degree . could you please guide...

07 September 2023 1,256 1 View

Which simulation software is better to simulate optical ring resonators?

Which simulation software is better to simulate optical ring resonators? COMSOL, Lumerical, Rsoft ? or OptiFDTD? considering that ring resonators simulation is very dependent to RAM memory and...

26 October 2022 526 1 View

How can use the multiple launch fields by using the Rsoft Fullwave and MOSTMultiVarFormat?

How can use the multiple launch fields by using the Rsoft Fullwave and MOSTMultiVarFormat. Namely, how can I design the name of the second launch field? Optionally, the name of launch file is the...

22 September 2022 735 0 View

Modelling a fabry perot saturable absorber in Rsoft?

I am trying to model a resonant cavity with a Saturable Absorber in it, in Rsoft. It could also be in Lumerical, any ideas anyone?

17 August 2022 3,943 1 View

Simulation of an Optical Waveguide(OWG) structure in Synopsys RSoft CAD?

Hi, I am simulating an optical waveguide structure (Type: Channel) in Synopsys RSoft. It's Silicon Nitride structure embedded in SiO2 background material. The OWG structure has multiple openings...

05 June 2022 4,379 0 View

Which software is better for Design of Optical Grating devices , GratingMod(Rsoft) or Optigrating (Optiwave)?

Please give your suggestion.

26 September 2021 1,573 5 View

Is COMSOL Wave Optics Module as precise as Rsoft fullwave (FDTD )?

I am going to simulate a photonic system with a non-sinosuid wave ( a pocket wave, like triangular). I am going to simulate my system in COMSOL but I am not sure that COMSOL could give me results...

01 March 2021 1,879 0 View

Can I consider Slab mode power instead of Launch power?

Good day everyone currently I'm using Rsoft CAD as simulation tool for a Y-splitter, and I have a case when the launch field TE1 and the patway monitors the launch power, byeond the split point,...

28 December 2020 2,149 1 View

How can I calculate group index of one dimensional photonic crystal by using Rsof?

Hi. I have designed a one-dimensional photonic crystal waveguide using bandsolve (in Rsoft) for slow light. I can get band diagram with respect to the normalized frequency ( ωa/2πc = a/λ ) for a...

12 July 2020 6,152 2 View

How to measure polarization conversiong efficiency using RSoft?

Hello, I'm trying to measuring PCE by using RSoft. What I wanna measure is Polarization conversion efficiency that is defined as the fraction of the incident circularly polarized optical power...

11 December 2019 4,643 0 View