· Spring return arrangement with screw for pitching
· Axial fan -1 No.
· Digital anemometer -1 No.
· To measure wing velocity.
· Stand alone battery bank -1No.
· Rated voltage – 12V Capacity -7Ah
· Battery type –lead acid
· Stand-alone inverter -1 No.
230 V/15/40/60/100Wx3 bulbs with individual ON/OFF using 6A toggle switches.
The advance solar energy training system must have various components for complete learning and study the complex issue for solar.
System must be supplied with 2 high performance photovoltaic cell panel 200W (100W Each) for a 12Vdc voltage.
50X50mm – 2 nos set of solar panel for study of effective of light with respect to different wave length for spectral response and carrier life time
Solar source in the form of halogen lampos 500 watt with moveable stand.
MPPT standalone inverter with proper battery connections etc
Charge controller 12v DC
I LUX meter : To measure the Intensity of light source on panel using.
inverter 12V to 220V AC,12v dc loads (FAN, LED LIGHT) to study load test,
CFL for AC load.
Battery: Capacity12V: 7AH
Facility for digital volt and ammeter for onboard voltage and current measurement
Facility for series parallel connection working of solar panel
Peltier module to capture and study temperature effect of solar radiation
PID controlled SCR based sensor signal conditioning panel
PT 100 sensor for temp monitoring
Facility for PC Based Data Acquisitions for the Plotting of Graph such as voltage versus time etc.
The System is having Capability to Store all Solar Radiation in Memory Card.
Set of interconnection cables.
Testing point for fault analysis for each section.
Voltage at maximum power point (Vmpp): 24.0 V.
Current at maximum power point (Impp): 1 A.
Panel movement with different aspect of angle.
Anodized aluminum framework for modules allocation.
Option for study of angle and direction of solar panel and light source.
Solar Energy data loggers supports the following measurements: AC Current, AC Voltage, Amps (A), Kilowatt Hours (kWh), Power Factor (PF), Volt-Amps (VA), Volts (V), Watt Hours (Wh) and Watts (W).
Type of Inputs: 1 Phase,2 phase,3 phase (3Ø-3/4 wire, 2Ø-3 wire, 1Ø- 2 wire)
Feature: Password protection
CT Primary: 1A/5A
CT Secondary: 1 or 5 A
PT Primary: 100V- 10,000 (programmable for any value)
PT Secondary: 100 to 500V AC (L-L) (programmable for any value)
Sampling Rate: Readings taken automatically every 600 sample/sec to 1sample/week.
Storage Capacity: 1 Million Samples.
Display: 16*2 LCD Display/ Touch Panel.
Communication: GSM/USB/MODBUS
The unit must provide Solar Power / Irradiance Measurement with Orientation & Tilt Angle)
Facility to measure Solar Power in the range from 400 to 1100 nanometers. The good Spectral Range, Orientation and Angular detection of meter allow users to conduct the most precise quantitative measurements of Solar Power Radiation
Solar Power Measurement with Orientation and Tilt Angle