Tekla to ABAQUS? - FAQS.TIPS

More Hadi Valizadeh's questions See All

Question about MHB (Mycorrhiza Helper Bacteria) isolation technique??

What are the most effective isolation techniques for obtaining MHB?? Is there are best approach techniques? I keep struggling in obtaining it.

26 July 2024 7,387 0 View

Question about Single Strain Arbuscular Mycorrhiza Fungi??

Now i am working on AM fungi single strain. What are the most effective isolation techniques for obtaining pure cultures of arbuscular mycorrhizal (AM) fungi?? Is there are best approach...

26 July 2024 6,520 1 View

Can a private laptop with 16GB RAM and Intel i5-1235U 1.3 GHz processor be used for WRF simulation with a 12*12 km domain?

I want to simulate WRF for a 12*12 km domain size. I want to run LSM and BSM models with a 5 minutes time interval. My laptop specification is 16GB RAM and Intel i5-1235U 1.3 GHz processor. Can I...

13 July 2024 2,037 0 View

How can I define the failure of the beam connector as a discrete fastener?

I am using the discrete fastener method for an LSF frame, and I want to consider the shear failure of rivets in my simulation. However, when I define lower and upper bounds for shear force, Abaqus...

06 June 2024 9,241 0 View

Alginate Gelatin Chitosan hydrogel??

How can prepare Alginate Gelatin Chitosan hydrogel?

05 May 2024 6,229 2 View

Does Gibbs 2 take into account both lattice and electronic contributions to the specific heat Cp ?

23 April 2024 2,280 0 View

Who is interested in participating in a survey regarding the impact of AI on workforce displacement in the logistics industry?

Hi everyone, I'm conducting research on the impact of AI on workforce displacement in the logistics industry for my Bachelor's thesis. If you work in logistics and have experience with AI...

07 April 2024 4,394 1 View

Survey question related to the "AI effect on workforce displacement in logistics industry"?

Hi everyone, Hope you are all in good well and health. I am currently pursuing my degree in Bachelor of Science in Logistics. I am searching for reliable survey questions that I can use in my...

01 April 2024 2,499 2 View

AI tools to use in writing a scientific paper?

Hello, Which are some AI tools that researchers can use in writing scientific paper?

23 February 2024 1,792 4 View

What's your idea about the applications of Soft Pneumatic Actuator Based On Water Electrolysis In Alternative Pole?

I have recently published a research paper about this actuator and I want know your idea about practical uses of this new actuator.

22 February 2024 10,071 0 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

How do I replace a file with a more recent version of a paper that was uploaded to ResearchGate?

The paper in question is "Interpolation of Nitrogen Fertilizer Use in Canada from Fertilizer Use Surveys". This paper was very recently published by Agronomy (MDPI). Agronomy has, in the last day...

07 August 2024 9,934 3 View

How to solve g_mmpbsa error?

Program: g_mmpbsa, version 2024.1 Source file: extrn_apbs.cxx (line 152) Fatal error: Failed to execute command: $APBS pybYcUWA.in --output-file=pybYcUW.out

07 August 2024 6,066 0 View

How do you delete a duplicate pdf for the same paper on ResearchGate?

The first pdf file I uploaded had an error. So I uploaded an updated, corrected pdf of that paper with a different pdf name. I dpon't want the old copy to be download or read.

07 August 2024 9,508 1 View

AUX gas reading problem on QE with full MS and PRM method in one run?

Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...

06 August 2024 4,953 0 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

How to set the environment variable for incorporating the GD3 dispersion in G16 for performing calculations using the OPBE functional?

I have incorporated the dispersion effect for the OPBE functional by specifying the S6, SR6 and S8 parameters for GD3 in Gaussian G09 package. For this purpose, I have defined the environment...

05 August 2024 1,494 2 View

JCPDS 65-7246 file please?

Dear Researchers Kindly share JCPDS 65-7246 file Thanks in advance

04 August 2024 5,613 1 View

Dirty and clean?

Hi everyone I need a file with a dirty and clean potato image

04 August 2024 7,199 4 View

Engr. Tufail

Hadi Valizadeh IGES and STEP Format are suitable. For more refer to https://support.tekla.com/article/export-to-iges-step-obj-stl-with-the-multi-converter.

Seyed Reza Jafari

For the goemetry export/import igs or step is a good format. You can easiky make an export from tekla and ten import it to abaqus.