Dear colleagues!
I am trying to simulate an impact pile driving (with a hydraulic hammer) in Plaxis.
I am going to simulate one impact using half of the harmonic cycle.
Which parameter do I need to use as an amplitude multiplier?
It should be a max weight of a hammer or it should relate to max energy?
Can you explain your question in more detail?
The type of impact (including the source, intensity, etc.) and type of your simulation (i.e. 2D or 3D) are required.
Ali Ahmadi, the source of impact is hydraulic impact hammer (there are technical characteristics above)
type of stimulation - 3D
I am trying to simulate an impact pile driving using embedded pile element
I need to estimate excess pore pressure near the area of pile driving and displacements which are caused by this action
- Badges
- Science topic
- Similar topics
- Computer Communications (Networks)
- Simulators