I simulated a patch antenna. I saw that the best S11 value is at 5.9GHz but when I measured I saw that it works at 5.93 GHz. What can be the reason?
The frequency is 0.5% too high. This is a very small error. I am surprised it is that close. The match is still good at 5.9 GHz. Go with it!
Actually, in your simulation, the real resonance is probably around 5.885 GHz. The lowest return loss is between two of your samples.
I wrote an answer but I think there was a internet connection faiure.
In fact I changed relative permittivity to see the result change and I forgot to rechange to 4.4. I realised so soon :( Sorry for that.
It hasn't change despite all the things I have. It works on 5.8 GHz. What can I do?
Even though ribosomal ITS as a universal barcode marker for fungi is still hampered by a few limitations, the ITS will remain as the key choice for fungal identification. I usually see the ITS 1F...
11 August 2020 3,597 10 View
I'd like to prepare a Lysozyme and Lysozyme Digestion Buffer (25mM Tris-HCL, pH 8.0, 2.5mM EDTA, 1% Triton X-100) for bacterial cell lysate with a final Lysozyme concentration of 20mg/mL. I need...
29 July 2020 2,818 2 View
Hi, I have question which I could not find an appropriate answer. By default, each laser diffraction instrument plots PSD using different bin sizes on the x-axis. This means, using default...
21 October 2019 6,899 3 View
Hello, I constantly submit parallel jobs in a shared HPC cluster for my OpenFOAM flow simulations and like everyone else, I have to decide how many cores I need. Our cluster runs constantly over...
11 May 2019 8,329 6 View
I have primers and i think i have to lysis the N2a cells but after that i couldn't find any protocol like how much i must add for template or other things.
06 June 2017 8,442 3 View
I would like to learn drawing or getting centerline of a surface in Solidworks. I search on internet but I found limited information. I found a programs like VMTKLab.There is a section for...
12 May 2015 2,748 7 View
Question to you and THEM, the New Journal, "Integrative Psychological and Behavioral Science" -- do you not know, and have you not seen, this done before? There appears to be a core problem for...
02 March 2021 3,024 2 View
Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...
01 March 2021 6,187 2 View
Im doing PBMC isolation -> CD14+ enrichment using magnetic beads -> stimulation setup. My negative control is just cells in cRPMI but they seem to get activated over and over again.
28 February 2021 7,883 3 View
Is there any reason for decrease in fluorescence emission intensity of HSA,BSA when increase the concentration ?
28 February 2021 3,653 4 View
I have designed a 24 GHz rectangular antenna on HFSS 3D model and got desired results while desing the same antenna with same dimensions I am getting resonance frequency at 27 GHz I am...
28 February 2021 4,426 2 View
28 February 2021 5,433 3 View
What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?
28 February 2021 6,516 5 View
Hello everybody! I have a problem with developing a compact antenna for the 1MHz-5MHz frequency range. Tell me what type of antenna can be used and what books and articles to read to perform this...
27 February 2021 7,710 4 View
I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...
27 February 2021 4,218 7 View
The reasoning behind this question is to align the ratios of the proton potential in energy per charge to the speed of light in distance per time. As these two dimensions appear to be related,...
27 February 2021 947 7 View