Request for PVDF and PES little quantity for research?

01 January 2019 1 7K Report

Dear brothers,

i am working on preparation of polymer membrane. I tested PEG to make my membrane flexible but it doesn't work. i need PVDF( Polyvinylidene fluoride) and PES(polytehr sulfone) ONLY 1 gm or less to test whether it works or not. presently i a working in Saudi arabia for some time..Any one who heve these polymers and is recently working in saudi arabia can help me in this regard .Thanks

Rajesh Devlekar

Dear Kashan, you please try it with compatible plastisizer your membrane will be soft and flexible or you can also try with coalscent solvent to make membrane flexible.

Badges
Science topic

More Kashan Khan's questions See All

Does anyone know about PLASTICZER with high conductivity?

Dear brothers. Does anyone have information about a PLASTICIZER with high conductivity like polyethylene glycol(PEG). i need it to make my polymer membrane flexible with high conductivity. thanks

01 February 2019 3,568 6 View

Problem of brittle membrane.How to get flexible polymer membrane?

i am developing a polymer membrane of polyaryletherketone using solution casting method.each time i got brittle and crispy membrane, whereas i want smooth flexible membrane. i added Polyethylene...

31 December 2018 8,986 10 View

What should be the Sulfonation peak integral value by H NMR?

Respectable brothers, i took H NMR spectra of my aromatic sulfonated polymer in Deuterated DMSO. The integration value of sulfonated peak i obtained at 8.2 is less than 1(0.09).i have seen in...

31 December 2017 4,668 5 View

Can anyone help me for integral values of given H NMR spectrum?

i took h nmr on 500 MHz, JEOL, Japan) collected in CDCl3.the nmr showed combine integrals but i need individual integrals from 6 to 8 ppm(pic#1).the file of nmr is in txt format and i cant...

10 November 2017 9,544 4 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

How do I determine the degree of polymerization of PEG 400 based on NMR integration?

Hello, I am working on the photocatalytic degradation of PEG 400. I would like to know if it's possible to determine the degree on polymerization based on NMR integration, or by the MW of the...

02 March 2021 6,186 3 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

Can polymer concentrations be calculated based on the number average molecular weight?

Hello, I spin-cast two different polymers onto wafers and measure their height as a function of initial concentration. For polymer A, I have the weight-average molecular weight (Mw) as well as...

28 February 2021 7,882 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

POlymer+DMSO solution and moisture??

What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?

28 February 2021 6,516 5 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

How to reduce residual stresses in MD simulation?

I am working on a preparation of representative polymeric structures of some popular polymers, such as polyimide or PTFE for MD simulation, during which a single nitrogen or oxygen atom will be...

24 February 2021 8,105 3 View

How to identify what type of fillers are in a polymer?

Hello everyone, I have some PHAs blended with fillers and nucleating agents, yet I don't know what kind of fillers or nucleating agents. The producer has shut down and there's no way to get in...

24 February 2021 1,356 8 View