Reg _ Spin coating solution preparation?

More Vinooth Rajendran's questions See All

What is the effect of polarization of unit elements in an IRS, if its built for mmWave application?

I usually don't see path loss models for IRS consider polarization. But specific to mmWave application, the polarization of the antenna has some effect. Is there any research that has explored this?

08 January 2021 3,054 1 View

Which Open Source emulator is best for SDN based IoT implementation?

We would like to implement SDN based IoT secure application. Please suggest best open source Emulator / Simulator.

15 December 2020 8,329 5 View

Dear researchers, anybody can suggest some classification algorithms for fire images?

dear researchers at present we are working in fire detection projcts ,i have a plan to implement the CNN with SVM for classification method. if you hav any best or recent techniques please let me...

01 November 2020 4,142 7 View

Which instrument is preferred to do untargeted metabolic profiling for a herbal plant?

In our lab, we are working on a herbal extraction optimation so that we need to understand the total profile difference between optimized and unoptimized extraction. Which that we have multiple...

14 September 2020 9,187 3 View

Does anyone knows how can i get the supplementary file for this paper?

I have been trying to check the supplementary file for this paper entitled "Transcriptomic and proteomic analyses of the pMOL30-encoded copper resistance in Cupriavidus metallidurans strain CH34"...

13 September 2020 4,945 4 View

Problem with Cryosections?

Hi, I have a problem with cryosections while staining. Positively charged slides are used for cryosections, in spite of that during the staining process, the sections are washed away during the...

10 September 2020 3,767 3 View

Appropriate protective eye wear for sunlight collection?

I am going to conduct experiment on sunlight collection. First the sunlight is collected using Fresnel lens. Then the concentrated light is transported via silica optical fiber. Since the...

15 March 2020 3,655 4 View

How to Estimate RSm(Mean width of the profile) for periodic profile obtained using turning and vertical milling?

As a part of my research work. i have obtained some machined surface using vertical milling and turning process. I want to check whether the predicted roughness and obtained roughness(Ra) are...

11 March 2020 5,718 3 View

Adhesive to stick silica glass fiber?

I am collecting sunlight via optical fiber bundle. In this regard i need to make fiber bundle in which the individual fibers are to be stick together. What kind of adhesive is helpful to do this?

20 February 2020 6,668 2 View

Are people willing to pay extra price for the recycled polymer based products?

I have two products (A&B) made of polyethylene (PE) but product "A" is produced from recycled PE and product "B" is produced from virgin grade PE. What is the willingness of the people to pay...

15 January 2020 2,405 6 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Concrete compressive strength databases?

I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...

27 February 2021 6,801 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View

What is the best surface to culture cells isolated from a skin biopsy?

Hello, recently I am having some difficulties with maintaining the cell culture of primary cells isolated from a skin biopsy (normal and malignant). The coating of culture plates with Matrigel (a...

26 February 2021 6,151 2 View

Alan F Rawle

Vinooth Rajendran

What material do you wish to apply to the glass? Is it a polymer or a sol-gel process?

The most important matters to concern you are:

The substrate and chemicals must be scrupulously clean. In the past I've posted a glass cleaning recipe. See: https://www.researchgate.net/post/What_is_the_best_way_to_clean_ITO_coated_glass_substrate
All liquids should be filtered to 0.1 microns or better
The solution must wet the substrate. The substrate needs to be dry and particle free. The solution viscosity (reduce polymer) or solvent can be adjusted to aid wetting.
A spin coater (e.g. Headway) is always better than dip coating in order to get an even film. The film coating thickness is determined by the chemical and its concentration in solution and spin speed,

Aref Wazwaz

Dear Vinooth Rajendran . See the following useful RG links : Chapter Thin Film Deposition: Solution Based Approach

https://www.ossila.com/pages/spin-coating

Kindly see also the following useful RG links: Article Transparent and conducting ITO thin films by spin coating of...

https://www.sciencedirect.com/topics/materials-science/spin-coating

Hello Alan

Thanks for your answer.

I want to coat the ITO on the glass substrate.

Regards

Vinooth.

Also check please the following useful RG link: Conference Paper Synthesis and Characterization of Spin Coated ITO Films

The following RG links are also very useful: Article Fabrication of highly conductive graphene/ITO transparent bi...

https://www.google.com/aclk?sa=L&ai=DChcSEwjP-pncqbL3AhUVh9UKHZUpDKwYABAAGgJ3cw&ae=2&sig=AOD64_0aoz-XHuspJSobivK_vgw2EMTH_Q&q&adurl&ved=2ahUKEwj9nI_cqbL3AhVPi_0HHbZTCjwQ0Qx6BAgEEAE

Article Research Article Characterizations of Cuprous Oxide Thin Fil...

Aref Wazwaz Thanks for your comments. Very useful.

You are most welcome dear Vinooth Rajendran . Wish you the best always.

How do you propose to spin coat ITO onto glass? The normal route to prepare glass with a conductive transparent coating is to use magnetron sputtering or something similar. I believe there are routes in sol-gel to make transparent coatings of this type, but I am not familiar with them. Our ITO coated glass was always brought in from companies such as Balzers.

Vinooth Rajendran A simple Google or RG search on 'sol gel ITO' picks up many interesting articles. For example, the attached.