Recipe for making MoS2 solution for spin coating?

More A Z M Nowzesh Hasan's questions See All

What is the best way to measure capacitance of graphene transistor?

10 November 2018 1,647 0 View

Why Palladium is not used for graphene FET electrode?

For metal evaporation, cost of Au and Pd pallets are comparable. But in most of the cases, Au electrode is widely used though the work function of graphene under Au is lower than graphene under...

10 November 2018 1,865 0 View

What is thermal smearing?

What is thermal smearing? Is there any particular model using mono-layer graphene? Does it follow Gaussian or Fermi smearing?

10 November 2018 7,252 2 View

Electrochemical impedance spectroscopy can measure C-V characteristics for graphene FET?

Electrochemical impedance spectroscopy can measure C-V characteristics for graphene FET? Can anyone share the detail experimental settings?

10 November 2018 9,337 0 View

How can we measure threshold voltage of graphene FET using CV characteristics?

10 November 2018 495 0 View

How can I model ionophoretic membrane in terms of double layer capacitance?

How can I model ionophoretic membrane in terms of double layer capacitance in graphene solution gated FET sensing?

06 July 2018 2,139 0 View

What is label free detection? What is the advantage in this process?

05 June 2018 10,004 0 View

Why hydrogen is used with methane in CVD graphene synthesis process?

Due to the heat at 1000 C, methane is decomposing by following the endothermic decomposition reaction and the by product is hydrogen. Then, why hydrogen is used with methane in CVD graphene...

04 May 2018 3,161 0 View

In CVD graphene synthesize process, which factors are playing role in absorbing carbon on metal surface which is self-limiting?

04 May 2018 221 0 View

Does ions take part in electric conduction in bilayer graphene?

Graphene due to its ambipolarity, can transport electricity with electrons and holes. But does any ion take part in this transportation? How holes are generated? How can I calculate...

01 February 2018 2,620 2 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Omar Adnan Abbas

Please check this Nature Paper.

I think it would be useful for you.

https://www.nature.com/articles/s41586-018-0574-4

Hind Lamkaouane

Hello, i have the same problem can you please tell me how you prepared the solution of the MoS2 and how we can deposited the exfoliation of MoS2 in water? thank you

Juhi Kumari

It is better to use NMP as an exfoliating agent. Actually MoS2 has very low solubilty in any solvent so it can be only dispersed. Mix MoS2 in NMP and sonicate it for few hours then centrifuge the solution. The supernatant can be used for spin coating.