In CVD graphene synthesize process, which factors are playing role in absorbing carbon on metal surface which is self-limiting?

A Z M Nowzesh Hasan @A_Z_M_Nowzesh_Hasan

05 May 2018 0 339 Report

Badges
Science topic

Similar topics
Chemistry
Carbon

More A Z M Nowzesh Hasan's questions See All

Why Palladium is not used for graphene FET electrode?

For metal evaporation, cost of Au and Pd pallets are comparable. But in most of the cases, Au electrode is widely used though the work function of graphene under Au is lower than graphene under...

10 November 2018 2,002 0 View

What is the best way to measure capacitance of graphene transistor?

10 November 2018 1,785 0 View

What is thermal smearing?

What is thermal smearing? Is there any particular model using mono-layer graphene? Does it follow Gaussian or Fermi smearing?

10 November 2018 7,520 2 View

How can we measure threshold voltage of graphene FET using CV characteristics?

10 November 2018 646 0 View

Electrochemical impedance spectroscopy can measure C-V characteristics for graphene FET?

Electrochemical impedance spectroscopy can measure C-V characteristics for graphene FET? Can anyone share the detail experimental settings?

10 November 2018 9,479 0 View

How can I model ionophoretic membrane in terms of double layer capacitance?

How can I model ionophoretic membrane in terms of double layer capacitance in graphene solution gated FET sensing?

06 July 2018 2,251 0 View

What is label free detection? What is the advantage in this process?

05 June 2018 10,202 0 View

Why hydrogen is used with methane in CVD graphene synthesis process?

Due to the heat at 1000 C, methane is decomposing by following the endothermic decomposition reaction and the by product is hydrogen. Then, why hydrogen is used with methane in CVD graphene...

04 May 2018 3,264 0 View

Does ions take part in electric conduction in bilayer graphene?

Graphene due to its ambipolarity, can transport electricity with electrons and holes. But does any ion take part in this transportation? How holes are generated? How can I calculate...

01 February 2018 2,756 2 View

How can I calculate carrier generation and recombination rate from the total carrier density for graphene?

31 December 2017 6,800 0 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,835 3 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

What is the best method to detect the chemical composition of pollen ?

I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?

28 July 2024 5,331 1 View

What are the perfect mathematical model for a solar-powered ship implementation?

A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids

28 July 2024 4,985 1 View