How to do buckling analysis in ansys apdl for laminated plate with PZT 5H attached?

I am doing buckling analysis of laminated plate surface bounded with two piezoelectric PZT 5H and axial compressive load is applied. I am getting an error, No ANEL table exists for material 2....

16 February 2021 510 1 View

Which furnace or method are suitable for direct melting of the powder ?

My question is very specific about melting of pure reduced Iron Fe in powder form

29 December 2020 4,352 3 View

I have one question related to cross correlation and auto correlation in neural network training?

Autocorrelation value is 0.3 and input cross-correlation error value is 3.Are the obtained results after training ANN is correct or wrong?

04 October 2020 9,686 2 View

Poly ICLC or Poly IC structure for docking ?

I want to do docking of Poly ICLC with protein. But, unfortunately there is no crystal structure for Poly ICLC or poly IC. Poly ICLC is a complex of Poly IC, poly lysine, and...

24 September 2020 6,107 1 View

What is the best way to preserve fungal RNA in shipping (1 - 2 days)?

The sample (fungal RNA) extracted with RNeasy Kit is supposed to be sent for sequencing.

15 September 2020 7,128 3 View

How to measure the T1 and T2 value from a MR image ?

I have an MR Dicom file having values of repetition time, echo time, Inversion time, flip angle, etc. I want to calculate T1 and T2 from this Dicom file. Is there any way to calculate this from...

12 March 2020 7,598 12 View

I want to simulate the rcc frame in a software, can anyone please suggest me the best option for research work?

Wanted to compare the behaviour between ductile and non ductile detailed RCC frame specimen

04 February 2020 270 2 View

How to calculate LOD & LOQ in the validation of analytical method using HPLC?

I have injected 5 samples of lowest possible concentrations. I have taken the std deviation of area and slope of the equation obtained for the regression line of calibration to calculate LOD &...

19 January 2020 4,730 7 View

How to know the depth of Xylem in live plants and trees? Is there any tool in market?

Hi, I am looking for a tool to measure the start and end of xylem tissue in plant and tree. Please send the link if such product (s) are available commercially. Thank you

18 January 2020 8,808 0 View

How do I get a charge discharge curve in a potential window similar to that of potential window of CV in Autolab workstation with nova software 2.1.4?

03 January 2020 1,399 2 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

How can we limit artifacts caused by rotation in fiber photometry?

We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...

25 February 2021 568 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

Best FE Program for Concrete Strengthened with FRP Sheets?

Colleagues, I have been using ANSYS to model concrete strengthened FRP sheets, but less than happy with it. Any has recommendation for efficient, easy to use FE program for modelling concrete...

22 February 2021 7,528 3 View

How can we add reinforced thermoplastics with granules in injection molding machine?

I need to make an injection molding machine in which short fibers are to be introduced. Short fiber length and material properties are to be determined and also the material strength are to be...

22 February 2021 4,290 1 View

Staining methods for skeletal muscle fiber typing?

does anyone know the best method to differentiate and quantify rapid fatiguing and fatigue resistant muscle fibers? the old method form the 1980's uses ATP staining which is quite labor intense?

21 February 2021 6,483 3 View

Why the storage moduli E' decrease with highr fiber volume?

Hi guys, I am facing problems to interpret a DMA results. Material: Composite Bisphenol A + curaua fiber What is being tested: the influence of fiber volume on the composites properties...

12 February 2021 174 7 View

What is the reason of the received optical signal to be slimmed down in multi-mode fiber?

What is the reason of the received optical signal to be slimmed down in multi-mode fiber? I have 4 km multi-mode fiber

03 February 2021 1,105 10 View

Could any one help me with ABAQUS tutorials on fiber reinforced polymer concrete columns please?

I am modeling Carbon Fiber Reinforced polymer wrapped concrete column in Abaqus, but I have faced so many difficulties especially in the Model< Interaction and Constraint module. SO could you...

26 January 2021 6,795 4 View

Dear Colleagues, I am looking for a way to dop of electrospining nanofibers on the HEPA filter.Someone can guide me?

Electrospining method is important for production of nanofiber .If doped with nanoparticles ,can be used for remove of contaminant such as VOC , but don't have mechanical strengh . For finding a...

24 January 2021 7,290 3 View