Helo Akhmed

There is a good instruction on how to do this

https://terradue.github.io/doc-tep-geohazards-v2/tutorials/rss_snap_s1_insar.html

Hi, Ahmed!

If you are pertaining to a semi-automated workflow using SNAP-StaMPS (StaMPS is a Matlab-based time-series InSAR processing tool), you can visit the STEP Forum. The forum provides rich discussions about all SAR- and InSAR-related topics. Here is the link. https://forum.step.esa.int/

I suggest using the search bar of the forum for any topic of interest or issues you encounter during installations of pertinent software packages and later, processing of SAR data.

Good luck!

You can easily perform the subsidence estimation using P-INSAR , but not possible with SNAP and MATLAB.

I hope you will also be fine. For the first and foremost, as you now, numerous papers have been published about this subject and you can use them as soon as possible. Furthermore, I deduce that if you want new sources, you can study the following articles. I wish the best for you.

1.Sentinel-1 for Monitoring Land Subsidence of Coastal Cities in Africa Using PSInSAR: A Methodology Based on the Integration of SNAP and StaMPS

2.Investigating persistent scatterer InSAR (PSInSAR) technique efficiency for landslides mapping: a case study in Artvin dam area, in Turkey

3.Land Subsidence Detection in Tan My-Thuong Tan Open Pit Mine and Surrounding Areas by Time Series of Sentinel-1 Images

Thank's for all.

Best gerards

Have a look on following research paper

https://www.tandfonline.com/doi/abs/10.1080/10106049.2019.1661031?journalCode=tgei20