Production of biopolymers from the waste biomass ?

More Manigandan Sekar's questions See All

Dear all, Is there any model available to predict the "possible diseases" based on the available pollutant concentration in air ?

In detailed human health risk assessment models. Is there any model that can predict the possible disease.

21 December 2020 7,535 5 View

How to get best LSTM model for regression problem? how to tune or select hyper parameters?

How to get best LSTM model for regression or prediction problem? how to tune or select hyper parameters?

29 June 2020 9,377 4 View

How to work with phasor model in matlab?

I am running IEEE 13 bus model in MATLAB with discrete time . But when I connect Renewable energy DFIG model with IEEE 13 bus system not working due to phase model of DFIG. How to rectify error?

31 January 2020 7,950 4 View

In fluent heat flux analysis results are not converging ?

I had solved the heat flux analysis of the multi-domain problem in fluent. Even after the 20000 iterations also the solution is not converging. As the iterations increase the results are diverging...

05 November 2019 1,713 3 View

Any specific procedure to be followed while converting one dimensional data into image?

Is there any specific procedure to convert 1D data to image before feeding convolutional neural networks ?

18 October 2019 8,309 4 View

Is there any open source Software In Loop (SIL) test method.?

Is there any open-source Software In Loop (SIL) test method available to test the network that was actually created in MATLAB. Anyone guide or give reference to use OPAL-RT testbed to integrate...

06 October 2019 8,124 1 View

Do addition of nanopartilces in soil increases the Plant yield ?

Can any one explain me that addition of nanoparticles enhances the growth of plant and produces more yield. If so, can anyone list me the nanoparticles i can use Plant is Tomato and Aubergines

24 June 2019 5,402 3 View

Do anyone have working protocol for cardiac perfusion in mice?

I am new to perfusion. I need to do cardiac perfusion in mice and my area of interest is brain further to sectioning and IHC. Does anyone have standard protocol of cardiac perfusion for this. Help...

29 May 2019 6,919 3 View

Is addition and removal of Co-author during submission of revised article is acceptable @Elsevier ?

I like to know the removal, addition and shuffling of co-authors is against moral and ethics in Elsevier Journals. Is it necessary to contact a editor to make such changes

20 February 2019 3,676 18 View

How to gelatin coat flasks for primary rat astrocyte culture?? Suggest me with how much percentage gelatin should i use??

I'm gonna culture rat mixed glial cells for first time. suggest me with how much percentage gelatin should i use to culture cells..

07 November 2018 7,023 6 View

Is stone a sustainable material? Is it a sustainable approach to use natural stone waste in architecture?

I'm designing a zero-waste restaurant and considering using marble waste to make some tables and a bar countertop. My clients think it's not "sustainable enough" and I would like to have more...

01 March 2021 4,326 7 View

How to model Supercritical water gasification (SCWG) process in Homer software?

Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?

25 February 2021 4,075 1 View

Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software?

Hi every one Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software? Biogas fuel is not available in the options thanks

23 February 2021 6,518 3 View

Aspen Plus Error: Unknown or undefined bead number?

Hello, in my Aspen Plus Simulation (see attachment) there are two heat exchangers. One HEX1 (oil+gas) ist fed by hot gas which ist coming out of a burner. The other HEX2 (gas+gas) shall work as a...

14 February 2021 8,096 2 View

By which mechanism does potassium hyrdoxide works as an activator in the preparation of activated carbon?

Activated carbon is prepared from biomass using KOH as the activating agent. What is the possible reaction between KOH and the biomass?

14 February 2021 8,095 4 View

Can downdraft gasifier for RDF be scaled up?

Dear researchers, In literature, so far I am seeing that downdraft is usually used for small-scale purposes (10kW-10MW). One of the reasons behind is "they do not allow for uniform distribution...

08 February 2021 5,403 1 View

Which is the most ecofriendly and effective activated agent for the preparation of activated carbon from sewage sludge?

I am going to prepare activated carbon from the waste activated sludge coming out of WWTP. Can you please help me in understanding, which chemical/physical activating agent will be most...

07 February 2021 9,507 5 View

Separation of CaO from Al2O3 and SiO2 in a solid waste, does HCl work?

I have an alkaline solid waste which contains the following components: SiO2, Al2O3, and CaO according to the XRF analysis (as it gives the results as oxides). However, I know from the XRD that it...

28 January 2021 9,469 3 View

Is it possible to economically reuse the heat content of water vapour that is generated during quenching of continuous casting of steel?

A huge amount of water is evaporated to cool down and solidify the liquid metal strands coming out of bottom of CCM mould. The steam contains significant latent and sensible heat energy, besides...

26 January 2021 3,446 4 View

What excamples do you know wasting unused contents of "empty" packaged products?

Most of us use tooth paste more times a day. The empty tube we throw away. I wondered how empty the tube really is. This does not sound being Research? I began to collect empty tubes...

19 January 2021 808 3 View

Antony V. Samrot

Why not? It depends on what biopolymer you prefer? If the waste contains more carbon you can use microorganisms to produce polyhydroxy alkanoates.

Piyush Malaviya

Please refer to this link.

https://pdfs.semanticscholar.org/ebe5/4be47c91e071239dba9e6dd18add1c4d9e0b.pdf

Joan Nyika

Have a look at this book chapter for more info: Chapter Biopolymers from Waste Biomass — Extraction, Modification an...

Ramón Piloto-Rodríguez

Lignocellulosic biomass is composed by three main components that the most percent is basically built by biopolymers already. Therefore the use of biomass waste to produce biopolymers is totally feasible. Biomass is an excellent pathway to substitute part of the petrochemical industry we are depending on today.

Nirmla devi

Please check:-

1.https://www.researchgate.net/publication/336845388_Plant_biomass-based_production_of_the_biopolymer_pullulan?

2.https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119568858.ch7

3.https://www.cetjournal.it/index.php/cet/article/view/CET1438028

4.https://link.springer.com/chapter/10.1007/978-3-642-32735-3_2

5.https://www.sciencedirect.com/topics/engineering/biopolymer-production

6.https://www.elsevier.com/books/biomass-biopolymer-based-materials-and-bioenergy/verma/978-0-08-102426-3

Gamal B. Abdelaziz

https://iopscience.iop.org/article/10.1088/1755-1315/36/1/012040/pdf

Please check the following link

Biopolymer production from agro‐industrial wastes was studied in Ph D and summarized in the attached file

Sivarasan Ganesan

Agricultural waste-derived lignocellulosic biomass is very convenient for producing biopolymers. But nowadays sea biomass-derived biopolymers are in trend.