Dear Amjad,

The very reason concrete is used, is to aid in accelerating this process. However, if you still want a Pozzolanic Material to be used along with asphalt and concrete, you can use it in the limits of volume replacement material. There is a wealth of literature addressing this issue (both in qualitative and quantitative terms).

Dear Arif..If you have some papers regarding this topic could you please forward them to me 

I saw the shared ref by Ahmed El-barbary, but it is never refer to the use of pozzolana in pavement mixture.

Thanks, It is a very good work. I hope there's more.

Besr regards, Mirko!

yes Abbas the attached paper is not related to the topic

Dear Sir,

pl check it.

http://d2dtl5nnlpfr0r.cloudfront.net/tti.tamu.edu/documents/471-2F.pdf

Dear Dr. Amjad

The pozolana is usually used as partial replacement of cement in concrete, it will give high strength as well as reducing the cement content. In the case of asphalt concrete, it will not work as pozolanic material since each particle will theoretically be covered with thin film of asphalt, hence it will act as part of the filler only and can change the volumetric properties of the mixture.

Thanks Prof. Saad for valuable answer

Dr  Amjad

you can see this article for knowledge.

Also, may be this reference is useful for you.

best regards.