Standard value are available in Internet for k and n. Can we take the k and n value as constant for Heat treated and non heat treated specimens. Or will it change..? If changing means, what is the procedure to caluculate k and n value..?
For a same problem, which answer will be accurate.? (a) Experimental (b) Numerical (c) Analystical And what are the reasons for the inaccuracy in each method.?
10 November 2017 7,269 7 View
What is Kernel Misorientation Number (KAM).? Could i get a basic notes about KAM...?
11 December 2016 7,457 0 View
I am working in Simulation of continuous deformation process. In which, i have to measure the stress, strain data at certain nodes at different time. Is it possible to read the field output...
10 November 2016 2,264 3 View
I tested an aluminum alloy at three different temperatures with same cross head speed. Now i want to calculate strain rate. How can i calculate? In specific I want to know, will it change with...
03 April 2016 2,660 13 View
I have tested the cold worked AA 6063 aluminium alloy for the tensile strength. The composition of the alloy is matching with standards. But the strength was very poor in this case. Which has no...
01 January 1970 8,581 7 View
"PUBLISHING IN A SCOPUS JOURNAL" Researchers are now at a cross road. The critical need to publish in a Scopus or ISI, etc journal is ever vital. Journal Publication fees must be submitted....
10 August 2024 8,621 1 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
Hello everyone, I am currently developing a thesis proposal and would appreciate your input on its viability and how to effectively carry it out. My proposed topic is: "Does the perceived threat...
10 August 2024 8,992 0 View
Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...
09 August 2024 7,615 1 View
Who will bear moral responsibility for the deaths of thousands of people in the event of an earthquake? Weeks and months remain before the onset of strong earthquakes that bring death to...
08 August 2024 6,134 12 View
Hello dear colleagues, We have prepared a manuscript on NiTi-based alloys and are seeking a second opinion on our current TEM results. If you are a Ph.D. holder with experience in TEM and have...
07 August 2024 9,563 0 View
I am Looking for a Science Journal with good impact factor and low publication cost to publish a review paper. Your suggestions would be appreciated.
06 August 2024 6,796 3 View
What is the prepared reference material that can be used in the ICPE-9820 Shimadzu Japan instrument, which employs inductively coupled plasma optical emission spectrometry (ICP-OES) to measure...
06 August 2024 1,896 1 View
There are a huge number of methods for studying objects in space, according to the senses (and not only). Mechanical, thermal, optical, acoustic, electrical, magnetic, based on particle beams,...
06 August 2024 7,102 0 View
In the case of a wound l recurrence after radical breast cancer and sentinel lymph node biopsy. Are the sentinel lymph node procedure recommended? If no axillary lymph node dissection was not...
05 August 2024 8,056 1 View